megajolt
Turbo Mini Forums

how much does it cost to get all the parts to run megajolt? how much is it to get it mapped properly for my engine? looking for a ball part figure really. hope you can help, many thanks

if you make your own trigger wheel and bracket and get the ford bits from a scrappy then about £130 ish (including a new MJLJ ecu)

add another £120 for the trigger wheel kit if you cant make one.

you can try ww.specialist-components.co.uk for this.

cheers, Mark.

how about for setup?can this be done at home? are there guides anywhere for making the trigger wheel and bracket? many thanks

setup is done on a laptop at home.

Crank sensor bracket - £14.99
Trigger-wheels £20 upwards

from www.trigger-wheels.com

Thats the company i ordered everything from apart from the edis parts
In total it cost me £230 thereabouts for everything i needed including the coilpack etc... from the local scrappy

Edited by dave_spr88 on 12th Jan, 2008.

Mine was £75 all in but then I made Megajolt unit & sensor bracket myself & got the pulley machined for free.

does it have to be a ford coil pack~? i have heard you can use 106GTI coil packs also?

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

I think I got all the parts for mine for under £100 made bracket myself, a friend machiened my pully for beers, all the parts I got from a scrappy for a tenner, and the ecu unit was an ebay find.
Shane

Use the Ford stuff or you risk burning out the EDIS.

Mapping works out to be anywhere from £50 - £100 an hour. It depends on what you want done ie on the road or rolling road etc etc.

Alex

AlexF

alex. i still need mine fixing if your around!

stu

balls to the blower!!!



1330,stage3 head, gt1549, canems ecu, S/C box and drops