Page:
Home > Help Needed / General Tech Chat > Oil cooler / stat mounting ?????

cossierick

User Avatar

3074 Posts
Member #: 1348
Post Whore

wakefield West Yorks

15th Jan, 2008 at 08:04:06pm

Hi all,
Got an oil thermostat and best place for it at mo is at back of the intercooler, can anyone see any problems by putting it there (eg is it too high for oil flow).
Or any better ideas for oil cooler

Any thaughts greatly receved as usuall.

Thanks Rick


Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

16th Jan, 2008 at 12:52:36pm

I reckon it'll be fine, after all its on the out side of the pump.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



cossierick

User Avatar

3074 Posts
Member #: 1348
Post Whore

wakefield West Yorks

16th Jan, 2008 at 06:46:32pm

Ok thanks, didnt want to put it there and it be too high.

Thanks Rick

iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

16th Jan, 2008 at 07:30:07pm

yeah will be fine, although you may want to subsitute the tape for cable ties *happy*

cossierick

User Avatar

3074 Posts
Member #: 1348
Post Whore

wakefield West Yorks

16th Jan, 2008 at 08:35:21pm

Cable ties !! Thats nearly as bad as the tape. lol Hopfully a nice bracket welded on.

Rick

Scruffy

User Avatar

1451 Posts
Member #: 328
Post Whore

Seaford Rise, South Australia

18th Jan, 2008 at 07:10:07pm

Don't use this type go for a sandwich plate type on the oil filter housing much less plumbing ( I run with a Metro front rad & Mini side rad combo).

I have to use a KA oil filter though!

On 5th Sep, 2011 Vegard said:
I stand corrected. You should know *wink*
Home > Help Needed / General Tech Chat > Oil cooler / stat mounting ?????
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: