clutch housings [edited]
Turbo Mini Forums

as the first time i wrote it it made no sence ill go again.

do you need a diffrent clutch outer housing for a pre-verto clutch or are they interchangeable between them? i know that the good Ap clutches are not verto clutches. apart from having a inertia type fly and starter and the pre-verto clutch do you need to change the housing?
is it still this style
or do you need the big domed one?

Edited by Paul R on 24th Feb, 2008.

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

that one will be fine

The housing will be OK.

But you will need a different arm, plunger and thrust bearing.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

cheers :), it was just a question as im getting another two engines this weekend and hopefully my turbo engine will be able to be moved in a few weeks as well. i was just seeing which bits i will need to give back to my friend for his project cheers
p

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis