Page:
Home > Help Needed / General Tech Chat > supercharger's cam....

Giancooper

39 Posts
Member #: 2402
Member

26th May, 2008 at 10:27:31pm

I guys, I used my supercharger engine 36 and 30 valve head, 1.5 roller rockers, cam follower whit extra hi lift and 285 piper cam...

I now that cam isn't the best for my engine, but what can happen?*surprised*

BENROSS

User Avatar

9812 Posts
Member #: 332
Resident Cylinder Head Modifier

Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem

28th May, 2008 at 01:38:01am

you lose all the power wher you need it
that cam is way too wild
your engine will make more power at way lower RPMs if you.............

ditch the 1.5 rockers and go for a N/A MG cam or a kent 266 for the road or an avonbar phase 2 for super fast road work and track use






Giancooper

39 Posts
Member #: 2402
Member

28th May, 2008 at 11:08:01pm

Stuart Gurr of vmax say me that are a good choice....

Say me it will pull from lower rpm and extend rev range higher also

Edited by Giancooper on 28th May, 2008.

Home > Help Needed / General Tech Chat > supercharger's cam....
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: