Megasquirt in Dual Wheel mode
Turbo Mini Forums

Having a bit of trouble getting the engine to run with the cam sensor fitted.

It runs OK until I select the second wheel input in Megatune and then will not start.

The MS2/Extra manual is a bit wooly on how to set it up with a 36-1 crank wheel and a single tooth cam wheel.

I think the timing of the cam wheel is critical as it resets the tooth count and if you do not get it right it the timing is out.

Any ideas? Otherwise I shall just have to turn the cam sensor whilst cranking it over.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."