quicky minisport 4 pots & 7.9 disks for 10" rims, any issies
Turbo Mini Forums

quicky minisport 4 pots & 7.9 disks for 10" rims, any issues, i'm considering cracking my credint card out 2moro

just need to know what fits best with 10" wheels, i have starmags, copper s reverse rims, inocenti reverse rims, banded standard mini 10"

SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia

the Search-section on this forum is blummin superb & simple to use, unlike some other forums, without the search-section & the help of this bunch of chaps on here i'll never be able to !!!Start the day with a 998cc turbo!!! :) i'm getting closer though!

Tom Fenton says: I have it all, make me an offer

speak to anton first dude, i'm sure he was on about getting rid of his.

I'm having them since 7 years now,nothing to say, sure they haven't done a lot of milage, but I would go the same way again (I would certainly buy a set of 7.5 instead of 7.9 to have not clearance trouble and use the wheel I want ).
be carefull about which wheels you want to use, my innocenti reverse wheels didn't fit above the 7.9 set, you'll need a spacer (reverse + spacer = torque steer), I'm now using ruspa wheels with a spacer, you should ask them before to buy the 7.9 brakes,

possibly.. still considering the options :S

As Fab says reverse rims won't fit anything other than 7.5" discs and Cooper S calipers, not without spacers etc anyway.

I have some spacers lol. Im using 7.9s had no bother at all, they bled up very easy too.



I wouldnt space them out too much though, gets a bit lively.

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

what about 7.9's and slotmags?

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

Slightly of topic. Mikerace what master cylinders is that you are using? And have you moved your pedalbox back inside the car?

i have KAD 4 pots no issues with them fitting

Is it just the pic or is the track massively different front to rear Mike?

Nah not much difference mate, i did put silly spacers on the front as a temp measure. Lockfast, yes the cylinders have been moved back and are Ap Racing.

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

yes slotmags are fitting above 7,9

i'bve been reding sometimes a spacer has to go between the drive flange & disk, to push the disk 2wards the car???? is this true, i dont reall want to use spacers, the only issue i have is if my starmags fit over ally calipers, i have s'disks but was thinking the alloy calper route to reduce wheight, + they're 4pots!!! even if i had to stick with 7.5 non vented it would be an improvement in braking & weight loss wou'nt it?

SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia

the Search-section on this forum is blummin superb & simple to use, unlike some other forums, without the search-section & the help of this bunch of chaps on here i'll never be able to !!!Start the day with a 998cc turbo!!! :) i'm getting closer though!

Tom Fenton says: I have it all, make me an offer

did have 7.5 std s ones (genuine on innocentis), they 're very good, used on track a few times ,with mintex 1144 pads nothing wrong to report .

about the spacer , it doesn't go between flange and disc but between hub and caliper , though you could use one to increase front track.