Page:
Home > Help Needed / General Tech Chat > The final 2 torque settings I need for the gear box

minimole23

4309 Posts
Member #: 1321
Post Whore

Wiltshire

23rd Jul, 2008 at 03:05:47pm

What torque should the diff end covers be?

What torque should the bolts that bolt the diff casing to the box be?

Thanks a lot, I am now off to start pulling the engine out and attack the baulkhead with an angle grinder!

On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding

tomf

User Avatar

300 Posts
Member #: 1746
Senior Member

Kent

24th Jul, 2008 at 01:24:50am

Off the top of my head they are all 16 foot pounds.

minimole23

4309 Posts
Member #: 1321
Post Whore

Wiltshire

24th Jul, 2008 at 07:45:05am

Thanks:)

On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

24th Jul, 2008 at 09:46:04am

I can confirm that, just did a couple. 16lbs/ft.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.
Home > Help Needed / General Tech Chat > The final 2 torque settings I need for the gear box
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: