Page:
Home > Help Needed / General Tech Chat > Weber Jets..?

Si P

784 Posts
Member #: 912
Post Whore

North Yorkshire

25th Jul, 2008 at 09:18:36am

Hi there

Does anyone know if all jets e.g Main Jet , Idle Jet Air Corrector and Emulsion tubes. Are inter-changable between Weber Carbs.

I know its sounds silly.

But I've moved up from a 45 DCOE side draught to a 48 IDA down draught.

They all look the same as in length and thread size. But the Emulsion tubes look to have a different directional hole paternation on them.?

Thought I could just swop them over to get me in the ballpark area to get the thing up and running.

Can anyone shine any light on this subject please.

Thanks

Si



Edited by Si P on 25th Jul, 2008.

I drill holes in everything..!

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

25th Jul, 2008 at 09:54:47am

I guess Carl will know this, but I know for a fact that some jets are interchangeable between DCOE and IDA carbs. If all are I don't know.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

Si P

784 Posts
Member #: 912
Post Whore

North Yorkshire

25th Jul, 2008 at 11:31:24am

Cheers V.

I'll wait for oracle to show.

Si

I drill holes in everything..!
Home > Help Needed / General Tech Chat > Weber Jets..?
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: