Page:
Home > Wanted > T3 turbine shaft

James_H

User Avatar

3692 Posts
Member #: 1833
Formally mini_majic

Auckland, New Zealand

27th Jul, 2008 at 12:54:53pm

pretty much i need a T3 turbine shaft including both wheels.

Went to rebuild my turbo but the Compressor wheel is goosed and the shaft is bent just befor the threaded bit.

i need, i think, the 40 trim (i think thats the standard metty item?)

long shot but its worth a try. if not i will just have to buy another turbo.

Cheers, James

rubicon

User Avatar

3756 Posts
Member #: 1709
I like granny porn.

LONDONSHIRE

27th Jul, 2008 at 01:53:16pm

haha i was messing about with one today
want it?

On 2nd Oct, 2009 Vegard said:

On 1st Oct, 2009 Jimster said:
I bet my first wank came quicker than your first mini turbo


These new modern turbos with their quick spool up time, would make the competition harder.


On 15th Aug, 2011 robert said:
phew!!! thank you brett for smashing in my back doors .( not something i imagined writing... EVER)

James_H

User Avatar

3692 Posts
Member #: 1833
Formally mini_majic

Auckland, New Zealand

27th Jul, 2008 at 04:46:02pm

if possible. what you want for it?

James_H

User Avatar

3692 Posts
Member #: 1833
Formally mini_majic

Auckland, New Zealand

22nd Jan, 2009 at 08:47:50pm

still in need if possible peoples.

stevieturbo

3594 Posts
Member #: 655
Post Whore

Northern Ireland

23rd Jan, 2009 at 03:16:51pm

Ive a turbo that came off my 2.4td volvo.

Compressor would be slightly larger than a metro T3, and the Volvo uses a 0.36 turbine housing.

Ironically...I had a turbo built up with a metro 0.28 turbine housing, and a new volvo compressorlol to help the volvo spool up earlier ( its a nasty automatic )

It's still in good condition, so shaft and compressor would be fine.

9.85 @ 145mph
202mph standing mile
speed didn't kill me, but taxation probably will


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

23rd Jan, 2009 at 04:12:34pm

I'm after .36 stuff. If I can get hold of that I've got several std Metty bits.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

James_H

User Avatar

3692 Posts
Member #: 1833
Formally mini_majic

Auckland, New Zealand

23rd Jan, 2009 at 06:25:31pm

sooo if V takes the .36 fandangles that ST is offering JH could get the standard affair from V?

Make sense of that and then write back *wink*

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

23rd Jan, 2009 at 07:36:15pm

Yeah! :)

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

James_H

User Avatar

3692 Posts
Member #: 1833
Formally mini_majic

Auckland, New Zealand

10th Feb, 2009 at 05:21:25pm

Stevie, would we be able to try and sort this out soon please? if i just give you what you want for the shaft and then i'll sort the rest out with V?

PM me what you want.

Cheers mate, James.

James_H

User Avatar

3692 Posts
Member #: 1833
Formally mini_majic

Auckland, New Zealand

19th Nov, 2009 at 05:30:51pm

I need to rebuild my T3 so i can sell all of my turbo gubbins as i'm in need of some money.

Can anyone help me please??!?!
Home > Wanted > T3 turbine shaft
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: