Page:
Home > Help Needed / General Tech Chat > fitting 4 pots?

Carl

User Avatar

2924 Posts
Member #: 95
Post Whore

liverpool-on-sea

18th Aug, 2008 at 09:49:20am

right i can get some unvented metty 4 pots for free wot do i need to fit them? metty flanges or mini 8.4 flanges? also at the moment im runnng 7.5 cooper s's. if i were to fit the 4 pots will they make my wheels stick out more.

thanks

no longer a series, but still 1.3 turbo.

On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl.

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

18th Aug, 2008 at 10:30:38am

So what exactly are you getting? And what are you planning on fitting?

To fit the metro 4 pots to the mini 8.4" setup all you need is the adaptor pipes (as the metro 4-post have 2 inputs) and the special ERS bolts http://www.minispares.com/Product.aspx?pid=35377

So mini flange.

Not sure they stick out further than the cooper setup, but I presume they do as the spacer drums were used on the rear of the later setup.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


Carl

User Avatar

2924 Posts
Member #: 95
Post Whore

liverpool-on-sea

18th Aug, 2008 at 10:54:55am

right sorry ill try again

at the moment ive got 7.5 cooper s discs and calipers fitted and i want to upgrade to metty nonvented 4 pot calipers. but dont want wheels to stick out further.

the cooper s needed spaced rear drums as well i think well mine has got them on aswell.

so i need
calipers
hose adapter kit
bolts
mini flanges
8.4 discs

no longer a series, but still 1.3 turbo.

On 28th Nov, 2008 Sprocket said:
Oh now that is a long shaft you have Carl.

Tom Fenton
Site Admin

User Avatar

15302 Posts
Member #: 337
Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner

&

TM legend.

Rotherham South Yorkshire

18th Aug, 2008 at 12:11:54pm

Now I thought you needed the Metro flanges. This I certainly what I have on my car, with the wheel locating-lugs machined off.


On 29th Nov, 2016 madmk1 said:

On 28th Nov, 2016 Rob Gavin said:
 I refuse to pay for anything else


Like fuel 😂😂

Rob H

4314 Posts
Member #: 700
Formerly British Open Classic

The West Country

18th Aug, 2008 at 12:26:21pm

I thought you only needed the Metty flanges if you where going for vented 4 pots but I've been know to be wrong.

Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

18th Aug, 2008 at 12:46:54pm

Rob, you are right, you only need the metro franges with the vented disks.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.

Home > Help Needed / General Tech Chat > fitting 4 pots?
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: