Page:
Home > Wanted > Someone with a mill to mod the back of a rocker cover for me please.

minimole23

4309 Posts
Member #: 1321
Post Whore

Wiltshire

24th Aug, 2008 at 11:56:57am

Hi

The rear of my mg metro rocker cover doesn't quite clear the back of the rockers and I was wondering if someone could just run a mill along the full height of the inside of the cover to make the clearence.

Obviously fluttering pieces of paper and a pint can be exchanged for this service.

Thanks
James

Edited by minimole23 on 24th Aug, 2008.

On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding

Tom Fenton
Site Admin

User Avatar

15300 Posts
Member #: 337
Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner

&

TM legend.

Rotherham South Yorkshire

24th Aug, 2008 at 12:39:01pm

Have you tried putting the bolts in loose and then shoving it right back before nipping them down? This usually works.


On 29th Nov, 2016 madmk1 said:

On 28th Nov, 2016 Rob Gavin said:
 I refuse to pay for anything else


Like fuel 😂😂

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

24th Aug, 2008 at 03:27:49pm

You could easily acheve the same with an air grinder.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

Turbo Phil

User Avatar

4633 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

24th Aug, 2008 at 07:31:04pm

Yep, just grind it away with a carbide where needed.

WWW.TURBO-MINI.COM

Home > Wanted > Someone with a mill to mod the back of a rocker cover for me please.
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: