Tools for sale
Turbo Mini Forums

Take a look at this lot just as a sample.
2 sets of professional stud extractors remove/replace head/block studs without marking the studs from 1/4 to 1/2
Snap On cylinder leakage tester.
Task Master pro compression tester,does most inc 16v engines.
SK Fuel injection pressure testing set does every Injection system known.Brand New never used.
Mira Valve seat cutting tool with 28 pilots
Bosch head die grinders with loads of hs stones
Race snap on top box 2 drawer with vast selection snap on sockets 1/4 3/8 and 1/2 drive imp + metric with ring spanners/combos from 4mm to 19mm
from 3/8 to 1/1/2
Engine hoist, pressure washer, parts washer, South Bend precision lathe with 3/4jaw face plates and heaps of tools.

Call Ian

http://www.avonbar.com

You got any prices? i might be interested in the engien hoist.

Might be interested in the snap-on sockets and spanners, any vauge prices?

How Much for Engine hoist ian.
2nd in line :)

Cheers

Shit Happen's

could i have a price for the valve seat cutting tool how many cutters please.

love that straight cut scream!!!
______
/___|_____
_ (@)___(@)

how much for the bosch grinder & stones? what model is it?

cheers

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

thought it was a rule ..... no price =deleted post

Everyone knows that instructions only have to be read if the thing doesn't work....

think that was just the location.

ALL SOLD FOR 10p !!!

Everyone knows that instructions only have to be read if the thing doesn't work....

Yes i moved to the darkside

Instagram @jdm_brett

Interested in the injection test kit, how much?

I am pretty much open to reasonable offers THAT is why items like this cannot be priced.
if you e-mail me at work I will respond sales@avonbar.com.

I have copied the stuff on from the other web site and pasted below just for the whingers.
J Knight dog box with clutch plate mk6 LSD 3.9 semi helical final drive central oil pick up ready to go £1250.00 inc vat and delivery.
Concours re-built 3 synchro 998 Cooper box remote change. £500.00
Mira valve seat cutting equip with 28 pilots, £2700.00
Bosch head die grinders, £95.00 each
Snap on Race top box 2 drawer, full of 1/4, 3/8 drive sockets metric and imperial sockects from 4mm to 1 1/2 af £1700.00
Sun cylinder leakage tester, £150.00
Taskmaster pro compression tester will do most 8v and 16v engines. £45.00
Bear 4 gas infa red gas annaliser 4 years old £4500.00 SOLD already
South Bend precision Lathe 3 and 4 jaw chucks face plates and loads of tools. £650.00
Ohous rod/piston balancer £250.00
The dog box is my own and NOT Avonbar's, also we are making way for new equipment and are having a workshop re-vamp as we will be doing more Classics, ie Midget, MGB, Triumph, Jag etc.

We have quite a few gearbox's and gearbox parts and components so if you know any one that is into gearbox rebiulding we have the lot, laygears diff units hubs 1st motion shafts casings forks primary gears drop gears A and A+ as well as new stuff, weight wize you would need a small van to collect. value £450.00 the lot or we will send it all to the scrap man.
Phone Ian @ Avonbar

http://www.avonbar.com

Sprocket this is a multi-piece boxed kit by Sykes pickavant model set number 314800 and is a 19 piece kit with quick release adaptors.covering all Bosch, systems, and will also do Dihatsu,fiat,ford,GM,Honda,Mazda,Mitsubishi,Nissan, Renault, Rover,Subaru,Suzuki,Toyota,VW/Audi and Weber-Marelli systems so that covers Ferrari etc.
£300.00 all in inc carriage

http://www.avonbar.com

South Bend precision Lathe 3 and 4 jaw chucks face plates and loads of tools. £650.00




This is a good quality lathe guys... Will be imperial no doubt though!

The Bosch die grinders are 27000 rpm 500 w GGS27L I have a a small box of hi-speed 1/2 dia x 1" AND 1" ball stones These stones are about £9.00 each these day s to buy, Just had call only 1 left now!!!

http://www.avonbar.com

Parts washer.hoist,compressor air tools now gone

http://www.avonbar.com

whats the pressure washer and how much

ill take a grinder and stones pls

cheque ok?

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Bit more comprehensive than I first thought with a price to mach

If it was more like £150, I'd have it

Sorry dude, count me out

Do you have bearings for the gearbox? I dont need the diff ones but need the rest I also need to buy an actuator from you

Pressure washer is a Kew Hobby 2000 psi with lance £75.00 plus £12.00 carraige.

http://www.avonbar.com

No 3rd motion shaft bearings left only had 4 anyway.

http://www.avonbar.com

Just did a stock check and we have 1 modified actuator new style in stock this will do 6 to 20 psi depending on pre-load so call me.

http://www.avonbar.com