| Page: |
| Home > Help Needed / General Tech Chat > dashpot questions | |||||||
|
60 Posts Member #: 4055 Advanced Member teeside |
1st Nov, 2008 at 04:11:30pm
hi was wondering if anybody could help the turbo engine in my car is ticking over well to high checked for air leaks everything seems ok was fiddling with dashpot and if i undo plunger and use it to slightly raise tube it sits in cars idle drops to normal is there any way i can adjust height of tube in dashpot i have filled to top with 20/50 oil is this correct or is it to much tried adjusting mixture screw but it has no effect whatsoever to idle speed any help comments greatly appreciated as i have absolutly no knowledge with regards to dashpots |
||||||
|
1303 Posts Member #: 30 Post Whore Epsom, Surrey |
1st Nov, 2008 at 05:34:43pm
have you tried adjusting the idle screw on the carb? |
||||||
|
3006 Posts Member #: 2500 Post Whore Buckinghamshire |
1st Nov, 2008 at 07:29:20pm
Also check that the needle is properly inserted in the piston and secure. |
||||||
| Home > Help Needed / General Tech Chat > dashpot questions | |||||||
|
|||||||
| Page: |