1330 Pistons
Turbo Mini Forums

Hello all,

Apologies in advance for posting yet another piston topic, however I dont think this question been covered (correct me if im wrong).

Im trying to source a +0.060' 1330 piston, 14cc or 18cc dish. Having great difficulties, as accralite dont supply a +0.060 piston, yet to hear from OMEGA.

The piston needs to be capable of approx. 15psi and around the 200hp mark.

Does anyone know where I can source one this size with a dish in excess of 14cc.

Many thanks,

Chris.

JE copuld be wioth a look but pay attention to the compression height as there are some je's about that ase about7mm shorter.

have a look here http://www.med-engineering.co.uk/product_d...92&vlang_id=436

OMEGA do a 6.5 cc dish +60" this togeather with your combustion chambers opend up say 28cc from the standard 21.4 will give you a compression ration of around 8.44:1 just right
i can provide this service for you please pm me

Thanks BENROSS but ended up sourcing +0.040' 18cc pistons as the 0.060' 18cc were seriously expensive!

I only have 18cc to play with as am using bmw K series head.

Chris.

So who sells the 18cc +0.060 pistons ?
I might need some next year

Accralite actually sell them, but they have to make them specially. 1 piston is approx. 150 quid + vat which incls gudgeon pin and rings.

Ok , thanks