| Page: |
| Home > General Chat > & here`s one i prepared earlier :-) | |||||||
 703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
13th Nov, 2008 at 11:02:44am
Opened up our 6 speed dog box today cause the reverse selector pin has decided to bend itself www.miniman.com.au
|
||||||
 5329 Posts Member #: 140 Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place |
13th Nov, 2008 at 11:09:36am
hell mate what a piece of kit!, hard to see whats happend but i hope there isn't to much damage for you to sort out. Best 1/4 mile 13.2 seconds @116 mph
|
||||||
|
703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
13th Nov, 2008 at 11:14:31am
Nah,,, it`s just bent the reverse gear slector "Arm",,, the one with the little pin sticking up into reverse gear,,, it`s just that they`re a pain in the arse to rip apart & stick back together,,, no problem tho,, just rather we didn`t have to do it,,, Old mate Stewy has reefed it out of reverse after a stall & it`s bent the little arm & now all the gears are stiff & locks te stick a bit here & there & it`s just one of those things,,, it`l be back on the track in a week or so www.miniman.com.au
|
||||||
 9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
13th Nov, 2008 at 11:22:10am
Interesting.
Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
 6549 Posts Member #: 1149 #1 Basshunter Fan Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes! |
13th Nov, 2008 at 12:10:17pm
I bet thats smart for Motorway cruising! 1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.
|
||||||
|
703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
13th Nov, 2008 at 12:26:26pm
hee hee Wil,,, you don`t realise how right you are actually,,, this big heavy thing with all that extra recipricating mass becomes an extra pile of oil pumps too , when you think about it ,,,, i can feel the power loss compared to my 4speed (ok it`s not tooo much), but it`s there & if i can feel it then, in my books, it`s not as good as say a really lightweight 5speed doggy,,, especially if that really lightweight internal-ed doggy was a sequential www.miniman.com.au
|
||||||
 1346 Posts Member #: 2340 Post Whore Dublin Ireland |
13th Nov, 2008 at 07:23:01pm
130mph In a Mini ? On 17th Feb, 2009 Rob H said:
I find the easiest way is to super glue the bolt to the end of one of my fingers. ______________________________________________________ |
||||||
 3756 Posts Member #: 1709 I like granny porn. LONDONSHIRE |
13th Nov, 2008 at 07:27:03pm
i ''think'' the benross beast does 130+maybe wrong.... On 2nd Oct, 2009 Vegard said:
On 1st Oct, 2009 Jimster said:
I bet my first wank came quicker than your first mini turbo These new modern turbos with their quick spool up time, would make the competition harder. On 15th Aug, 2011 robert said:
phew!!! thank you brett for smashing in my back doors .( not something i imagined writing... EVER) |
||||||
 998 Posts Member #: 2178 Post Whore Leyland, Lancs |
13th Nov, 2008 at 07:30:04pm
Hasn't he clocked around 142mph or so? On 15th Jul, 2009 fastcarl said:
a breif struggle ensued but Will emerged the victor with a pair of undies in his possesion On 21st Sep, 2009 apbellamy said:
No, but you did chuck your guts up over my front gate the Saturday before! You even managed to get a bit in your arm pit... |
||||||
|
1346 Posts Member #: 2340 Post Whore Dublin Ireland |
13th Nov, 2008 at 07:35:33pm
I was just recoing in auss it is very hot with the air density and a NA 8 port push rod engine it would be asking a lot for it to make 200+ hp On 17th Feb, 2009 Rob H said:
I find the easiest way is to super glue the bolt to the end of one of my fingers. ______________________________________________________ |
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
13th Nov, 2008 at 07:39:15pm
On 13th Nov, 2008 PaulH said:
I was just recoing in auss it is very hot with the air density and a NA 8 port push rod engine it would be asking a lot for it to make 200+ hp I knew there was a reason to live in a cold damp country. Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
3756 Posts Member #: 1709 I like granny porn. LONDONSHIRE |
13th Nov, 2008 at 07:52:41pm
thats about theonly reason rob On 2nd Oct, 2009 Vegard said:
On 1st Oct, 2009 Jimster said:
I bet my first wank came quicker than your first mini turbo These new modern turbos with their quick spool up time, would make the competition harder. On 15th Aug, 2011 robert said:
phew!!! thank you brett for smashing in my back doors .( not something i imagined writing... EVER) |
||||||
 3692 Posts Member #: 1833 Formally mini_majic Auckland, New Zealand |
13th Nov, 2008 at 08:53:57pm
girl walking around in white t-shirts getting caught in the rain?
|
||||||
|
703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
14th Nov, 2008 at 01:33:43pm
Yeah it gets warm here sometimes, Not all the time tho,,, just imagin what our engines would run like if they were in England www.miniman.com.au
|
||||||
|
3692 Posts Member #: 1833 Formally mini_majic Auckland, New Zealand |
14th Nov, 2008 at 01:35:22pm
piss off matt you bastard!! |
||||||
|
6549 Posts Member #: 1149 #1 Basshunter Fan Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes! |
14th Nov, 2008 at 02:27:59pm
I think even the silly engined Minis will struggle to get past 150. Im sure some of the boffins on here would be able to calculate.
On 13th Nov, 2008 PaulH said:
130mph In a Mini ? 1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.
|
||||||
 10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
14th Nov, 2008 at 02:33:48pm
hmm (books flight) If something is worth doing, it's worth doing half of. |
||||||
|
703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
14th Nov, 2008 at 11:58:15pm
JamesH,,, it really is tough living here,,, constant clear blue skys most of the time, wicked surf, lots of hot bricks buzzing around, lots of naked hot Swedish Backpacker chicks wanting to hook up, constant erections www.miniman.com.au
|
||||||
|
3692 Posts Member #: 1833 Formally mini_majic Auckland, New Zealand |
15th Nov, 2008 at 12:19:18am
hahaha! thats genius!! |
||||||
 2641 Posts Member #: 19 Post Whore newcastle |
15th Nov, 2008 at 12:56:09pm
going back to the 142mph ... shaped like a brick .... plus rich did some high speed stuff in his 16v and i can`t remember what he got out of it Everyone knows that instructions only have to be read if the thing doesn't work....
|
||||||
|
703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
17th Nov, 2008 at 07:27:36am
So Who`s done 142mph in a mini?
www.miniman.com.au
|
||||||
|
3692 Posts Member #: 1833 Formally mini_majic Auckland, New Zealand |
17th Nov, 2008 at 09:06:26am
benross. |
||||||
| Home > General Chat > & here`s one i prepared earlier :-) | |||||||
|
|||||||
| Page: |