valve and fuel mixture questions
Turbo Mini Forums

hi could someone please tell me how i can tell inlet from exhaust valves with my rocker cover off so i can set them tomorow also think my fuel mixture is wrong is there any tips on setting the mixture such as screw all the way in then undo 2 turns or anything sorry if questions sound daft but im a pure newbie to turbominis thanks

from outside to inside:

Exhaust-->Inlet--->Inlet--->Exhaust--->Exhaust--->Inlet--->Inlet--->Exhaust.

the valves are in this order from any end....... ex inlet, inlet, ex,ex, inlet inlet ex.

scre in the screw inrichens it .......

you need a lambda to set it right or ....... co meter never let a turbo motor run lean on WOT ...... wide open throttle or you will quickley kill the pistons it must be set right

timing first though then mixture

1000 rp vac disconnected 6 deg btdc is a good start

thanks james and benross your help is much appreciated