Page:
Home > For Sale > 8:1 Low Compression 998 Engine Complete/Breaking

John

User Avatar

10022 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

apbellamy and myself have recently MOT'd our Metrovan.

Now it is time to replace the engine. So the old one is for sale.

The engine has done 56,000 miles and run's very well.

Emissions for test were less than 1% CO @ Idle (too lean i know)
and HC was 400ppm

BT (it's an ex BT van) upgraded the head to unleaded in the early ninties when it had covered approx 35,000 miles.

It runs well and can be seen running until Friday 21st november.

I will sell the engine/box complete for £50 + a complete A+ gearbox in part exhange. (condition of box is not really important, but needs to be a good case etc as will be used as an exchange)

Otherwise will split and sell as follows.

8:1 Low compression short engine £20
(ideal for super/turbo charging?)
CAM4810 Standard unleaded cylinder head - £20
(Postage is £15 or you can collect it)

Other parts are available including clutch, drop gears, clutch housing, HIF38 carb etc.

let me know if you need anything as I have some other bits and pieces too.

The bigger parts are collection from Rotherham, South Yorkshire. I can post smaller stuff, like carb etc.

Edited by John on 18th Nov, 2008.

If something is worth doing, it's worth doing half of.


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

I presume it's an A+.

If so I'm interested in the short engine. I do have some good A+ boxes if you'd prefer not to split it. But iirc all my boxes have the diff removed.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


John

User Avatar

10022 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

Yep A+ 998

Can sort you the short engine. Do you want to come see it running first or anything? Coming out of the car friday night.

If something is worth doing, it's worth doing half of.


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

I guess you mean 21 November not december?

Not bothered about it running or not.

Might be available on the 6 Dec to come and get it.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


John

User Avatar

10022 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

Duh yeah 21st november sorry *frown*

If you want it I will call it sold and hold onto it for you.

If something is worth doing, it's worth doing half of.


John

User Avatar

10022 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

All being well, the Van will be on the road on December 1st so we could probably deliver after that (for a small fee).

A deposit will secure the short motor for you.

Edited by John on 18th Nov, 2008.

If something is worth doing, it's worth doing half of.


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

short engine sold to wil_h. Just recieved you're deposit. thanks

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

Home > For Sale > 8:1 Low Compression 998 Engine Complete/Breaking
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: