Another Turbo Mini Begins
Turbo Mini Forums

Also I'm hoping to end it aswell !

Heres the SP

Mini (obviously) bellnose, mayfair, good shell
Metro Turbo engine complete and fitted by someone who couldnt get fuel to it and make it run, bought cheep and shipped to my shed.

So, run some fuel through and start, bit lumpy as been stood but nice sounding healthy motor.

Now lowered on hi lo's 7x13s MPI tank and pump

Plan is mild tune to start then try convert to Megajolt or similar and once controllable go looking for more power

Bits to order -

Curley Arches
Adj front suspension
Cross Pin Diff
Straight drops
carpet
rear cage

Coupla holes to weld nothing serious which is nice and freshen the paint, thats all folks !

Well here goes up n running feb 09 !

Sounds good, welcome to the forum!

Hello and welcome,
never heard it called a bell nose before
we need pics

Yes i moved to the darkside

Instagram @jdm_brett

welcome, lets have a looksee at what were dealing with

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

does that make the front of a round nose mini a bell end??

If something is worth doing, it's worth doing half of.

Hello and welcome

Sounds like a striate forward project (hope you don’t get what i had and cam across unforeseen expenses)

Good luck with it and keep us informed about your progress

"Tuning should be a compromise between what is possible and what is necessary"

10)Thou shalt always quest for more power

yes u could put that down as an "unforseen expense"

"Tuning should be a compromise between what is possible and what is necessary"

10)Thou shalt always quest for more power

Welcome

In the 13's at last!.. Just

Welcome, seeing as your going to fit straight cuts and a new diff, you might think about looking at your mains and big end bearings seeing as its been sat for a while.

Own the day