3 Clock Connection
Turbo Mini Forums

I'm after the black wired connection thing, that goes into the back of the 3 dial 1275GT clocks ?.
They all need re-connecting, as my indicators have stoped working etc.
Where Can i get a new one from ?, or just the connecters.
as i can't open the old connections that the wires go in to.

Cheers

Shit Happen's

Allrite mate have you not got an old loom lying about that you could cut it out of then solder into your own loom? Should be like for like with colours aswell. A scrapyard or mini breaker like mini classics would prbably have one if you havent.

This connection is the same on all the minis fitted with the clocks in front of the driver, whether 2 or 3 clocks, so it shouldn't be too hard for you to get hold of a used one. Otherwise somewhere like Autosparks that supplies full replacement looms may be able to sell you a new one.

If you look into the end of the plug there should be two small tangs that each pin uses to locate into the housing, just push them in with a paperclip or similar and remove pin, then solder new wire on, reinsert and your done

On 6th Jan, 2009 hario said:
If you look into the end of the plug there should be two small tangs that each pin uses to locate into the housing, just push them in with a paperclip or similar and remove pin, then solder new wire on, reinsert and your done

Shit Happen's