Page:
Home > Help Needed / General Tech Chat > Spider/Spline oil pump drive

alpa

520 Posts
Member #: 2093
Post Whore

Grenoble, France

12th Jan, 2009 at 08:15:22pm

Hi,

Could you explain how a spider oil pump is connected to an oil pumps ?
I see start/slot/pin driven oil pumps on sell, but never spider driven.

Thanks

std 998 A+, g295, MD266, RHF4, 109hp @0.8bar/5400rpm

Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

12th Jan, 2009 at 08:31:19pm

the spider drive pump has a little adaptor that sits on the end of the pump.

http://www.minimania.com/web/Item/chm108/invDetail.cfm

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



alpa

520 Posts
Member #: 2093
Post Whore

Grenoble, France

12th Jan, 2009 at 08:44:05pm

Thanks. Of course it's unavailable.
Never mind, not sure I'll use the 731 I bought, I still have to measure the profile.

std 998 A+, g295, MD266, RHF4, 109hp @0.8bar/5400rpm

Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

12th Jan, 2009 at 08:50:35pm

I used to have a couple somewhere,

i'll have a look for them.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



alpa

520 Posts
Member #: 2093
Post Whore

Grenoble, France

12th Jan, 2009 at 08:54:23pm

Thank you.

std 998 A+, g295, MD266, RHF4, 109hp @0.8bar/5400rpm

Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

12th Jan, 2009 at 09:20:22pm

found one,

let me know your address.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/


Home > Help Needed / General Tech Chat > Spider/Spline oil pump drive
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: