att Miniwilliams t3 head
Turbo Mini Forums

hi boyo well after not selling my 12g206 head im going to have to bight the bullet and have a go at chambereing my turbo head my self . ive got the template and some engineer blue and the grind stone.

what ill do is mark out gasket rings first the put on template , grind out then measure the cc hopefully its shopuld be near the 28 cc im after then it shoulkd be a matter of reducing the chamber deck height to get the additional cc's so wish me luck.

always looking for them bigger bunches of bannanas

well what a result.
today i tryied one chamber and guess what i mark round template ground out the excess meat and filled up to 29cc with out much chamber depth loss currently sitting at about 7.5mm.

ive just got to be carefull when grinding out that i dont hit the seats to much, this time i will leave a couple of old valves in just to stop this.

always looking for them bigger bunches of bannanas

well done mate! Dame good show.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com