| Page: |
| Home > For Sale > Solid Tower Mounts | |||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
29th Jan, 2009 at 11:43:48pm
Never used £10 posted, only selling as I've made some custom ones or £5 if you can guess why I've made custom ones.
Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
29th Jan, 2009 at 11:59:37pm
On 29th Jan, 2009 Rob H said:
£5 if you can guess why I've made custom ones. These ally ones you are selling are too thin therefore when the bolt bottoms out on the subframe, there is still a gap between the mounts 
and for £5 you can keep them, if that is the case. I already have a set. all they need is a washer On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
 3692 Posts Member #: 1833 Formally mini_majic Auckland, New Zealand |
30th Jan, 2009 at 12:01:04am
you have made custom TI ones?
|
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
30th Jan, 2009 at 12:01:37am
Good guess Colin but wrong. Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
30th Jan, 2009 at 12:11:51am
On 30th Jan, 2009 James_H said:
you have made custom TI ones? Don't be silly titanium is twice as dense as aluminum. Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
603 Posts Member #: 1938 Post Whore near Dundee |
30th Jan, 2009 at 12:14:18am
its a twin bolt subframe?
|
||||||
|
Site Admin  9407 Posts Member #: 58 455bhp per ton 12 sec 1/4 mile road legal mini Sunny Bridgend, South Wales |
30th Jan, 2009 at 08:08:21am
you have made some from nylon? On 15th May, 2009 TurboDave said:
I think the welsh one has it right! 1st to provide running proof of turbo twinkie in a car and first to run a 1/4 in one!! Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials |
||||||
|
172 Posts Member #: 1600 Advanced Member Portsmouth, Hampshire |
30th Jan, 2009 at 09:52:44pm
you were bored,
|
||||||
|
3692 Posts Member #: 1833 Formally mini_majic Auckland, New Zealand |
30th Jan, 2009 at 10:01:54pm
you made them because want your own section ALA Carl Austin?
|
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
4th Feb, 2009 at 08:13:22am
On 30th Jan, 2009 James_H said:
youve cut the little ring off the tower mounts on the subby? Sort of, I've not got round to cutting the rings off the subframe yet but I am mounting the frame direct to the bulk head, hence no lower mounts and bigger upper mounts. As an aside I save about 400g in the process. Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
| Home > For Sale > Solid Tower Mounts | |||||||
|
|||||||
| Page: |