Rotor Arm and Cap
Turbo Mini Forums

Just moved this question from the Introduce Yourself Section.
Bit of a balls up on my part!

Hi,

Sorry if this has been covered before. I've tried a search but haven't found a suitable thread.

I have a Mk2 Dizzy, Lucas 42628H and was under the impression that a GDC156 Cap and a GRA2143 Rotor Arm would be suitable for this dizzy. I have just read an advert that told me that this combination is ok for all Lucas electronic distributors apart from the Turbo!
Can someone please enlighten me on which items I need for my Turbo installation?

mk2 normaly have a lucas 25D on? it should be stamped on the body.

The cap is a clip-on and a quick search on minispares found this
http://www.minispares.com/Product.aspx?ty=...FOR%2025D%20D...

http://www.minispares.com/Product.aspx?ty=...R%2025D%20DIZZY

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Thak you gr4h4m for taking the time to answer. I've had a look at the dizzy and despite have a multitude of letters and numbers stamped on it 25D does not seem to be amonst them. My dizzy also takes a screw on cap. I have just found another site that tell me that I have a (Lucas 65DM4
electronic) model.