one old used plus 40 mg metro turbo piston
Turbo Mini Forums

i need one old used +40 mg metro turbo piston ,and a set of rings for 4 pistons ,or enough to get me a set .i have a few rings on them but no oil rings . pm me if you can help .

thanks
robert

Edited by robert on 2nd Apr, 2009.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

got a set of KP's +40's
new

thanks for the offer rubi ,but id like a mg turbo piston ideally .

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

I've a full set of rings minus one compression ring for + 40 21253,what's your rings height.
what's the ref on your pistons

rings are 1.5mm1.5mm,3.9mm fabrice ,iv got a compression ring ,so that sounds good ,i think you may find that the oil ring is thinner than these though .?the pistons are 22357.
thanks fab
regards robert

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

mines are 1.5;1.5;3.0 r41570 rings
will look in the garage jungle but don't think I'll have larger than these in +40

sudden image of fab looking like the hunter from jumanji standing at the door of his garage .

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

mdr

but I hunt nothing, my 22357+40 pistons have narrower rings,@ 1.2;1.2 and larger oil control one (4mm)
so yours certainly genuine ones not the mega type 22357, lucky boy!
though I have possibility to have custom oil control ring made by a good shop , lmk if needed
regards Fabrice

this is the link to for the rings ,the stock of piston and rings they have seem end less
they're next door and nice guys:
www.ondulex.com

BONJOUR FABRICE ,CA VA ?

combien de l'argent pour les rings qui avec le 1.5 . 1.5 ..et combien pour les rings avec le 4mm oil ring .

phew thats my french used up lol,from now on you can feel justifiably proud of your english ,when you see how bad i am at french !!
i think maybe my oil ring i measured at 3.9mm will be the same as your 4mm .so let me know how much you want for the two sets of rings ,and i can work out if thats the best way for me to go ..

regards
robert

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

Ca va très bien, merci beaucoup!
Proud of my english ? , I'm not sure about what I'm writing so oftenly....

can you confirm the oil control ring size please, 3.9 or 4 mm?I'll ask the machine shop for a price.
about mines, with the money crash, I would prefer bananas , potatoes or beer