Remote Turbo Manifold
Turbo Mini Forums

Hey Paul, how did the strategy for ghe widebands worked out ? Is that the only solution of how to apply widebands on the inner and outer sylinders with a turbo setup ?

The sample chambers appear to work well, we'll know for sure shortly as the latest build has both pre (sample chambers) and a post turbo wideband to compare to.

Bosch do make wideband sensors now designed to go pre turbo, I've not researched into them too much as we've got manifolds with the sample chambers

Hmm... so let me get this right... what I need to do is to weld two vertical pipes of 20mm ID to the down pipe with a wideband bung at the top, the I'll tap from the centre runner and the outer runner of the manifold and direct them to the bung respectively welded on the previous two pipes using compression fittings. And by this, one would be eliminating the heat and pressure of the gases upstream of the turbo.