| Page: |
| Home > Help Needed / General Tech Chat > Valve Guides | |||||||
 1547 Posts Member #: 2727 Post Whore Bicester |
6th May, 2009 at 01:29:25pm
Hey guys, im going to press some new valve guides into my head, but can anyone tell me how fare i need to press them in (how much guide needs to be protuding from the spring seat).
1972 998 TURBO SLEEPER |
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
6th May, 2009 at 03:00:50pm
It should say on the sheet following the valves, but from the top of my head it's approx 14mm..
On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
1547 Posts Member #: 2727 Post Whore Bicester |
6th May, 2009 at 03:09:27pm
Thanks Vegard, im using standard MG metro rockers and cam 1972 998 TURBO SLEEPER |
||||||
| Home > Help Needed / General Tech Chat > Valve Guides | |||||||
|
|||||||
| Page: |