some of my early two piece wheels
Turbo Mini Forums

These are aset i made up years ago,
repolished as you can see,

some marks on the faces of the centres through use,
7x10" 1" neg offset,
these use a cut down revolution nut
3" inner rim ,4" outer rim,

these will fit a 7.5" setup using minispares centre 4 pots, BUT you need to cut the top of the outer bleed nipple off otherwise it will hit the rim, i had no problem bleeding this type of caliper using only the inner nipple.

i do not know if there will be any mods needed to other types of calipers, i have no way to check so please don't ask, as i won't be spending any time finding out for you,

£320.00 , prefer collection,

WWW.FORCE-RACING.CO.UK PLEASE CLICK HERE