Page:
Home > Wanted > Long shot: 1X Cooper "S" rod.

Turbo Phil

User Avatar

4633 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

28th Jun, 2009 at 07:16:24pm

I know it's a long shot, but does anybody have one odd Cooper S rod going spare ?

Cheers
Phil.

WWW.TURBO-MINI.COM


lockfast

559 Posts
Member #: 2775
Post Whore

Aberdeen

28th Jun, 2009 at 07:24:50pm

Have you got a part no? I have 3 rods from a 1071s. Are these the same as what you are after?let me know

PaulH

User Avatar

1346 Posts
Member #: 2340
Post Whore

Dublin Ireland

28th Jun, 2009 at 10:25:32pm

PM you tommrrow Phil I have 6 odd S rods here Phil :)

On 17th Feb, 2009 Rob H said:
I find the easiest way is to super glue the bolt to the end of one of my fingers.

______________________________________________________

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

28th Jun, 2009 at 10:32:19pm

I've got a severly modified Longman rod I could get rid of. Nothing fancy, but you'll have to check the other three in the lathe...



I bought two from Bill Soilis just to see how Longman prepared their rods.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

Turbo Phil

User Avatar

4633 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

29th Jun, 2009 at 11:13:51pm

Thanks for the offer chaps. Are the 970, 1071 & 1275 "S" rods the same ?
I'm just waiting to hear from Paul, if he can't help I'll let you know.
Thanks again.
Phil.

WWW.TURBO-MINI.COM


PaulH

User Avatar

1346 Posts
Member #: 2340
Post Whore

Dublin Ireland

29th Jun, 2009 at 11:26:43pm

The rods I Have phil are infact Midget rods AEG625 I have 3 spares if one is any good you welcome to one :)

On 17th Feb, 2009 Rob H said:
I find the easiest way is to super glue the bolt to the end of one of my fingers.

______________________________________________________

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

30th Jun, 2009 at 08:26:17am

970 ones are longer. More accurately, the forging is the same, but the small end is drilled further "up"

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.
Home > Wanted > Long shot: 1X Cooper "S" rod.
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: