T3 actuator on a T2
Turbo Mini Forums

as the title, i have a nice shiney avonbar 12psi actuator and i was thinking of changing out to a T2 turbo.

i have had a measure up and i can make it fit with a bit of bracket work but i just wanted to check there wasnt some reason that i was missing that would stop it working.

any ideas would be helpfull

There's no problem. I use the Avonbar billet actuator with a T2. You'll just have to make a bracket up.

Phil.

WWW.TURBO-MINI.COM

cheers phil

No worries. I assume you've got the bulkhead box fitted though ?
If you're using the Mirage manifolds it may still fit, but I couldn't confirm it.

Edited by Turbo Phil on 1st Jul, 2009.

WWW.TURBO-MINI.COM

still making the manafold, going to try and sidemount it with the late shape servo still there, if it fails i want to keep the turbo there just make the servo remote.

anyhow will get the build log up when i get a chance to write it up, but low on time atm

again cheers for the help though.

hi

sorry to go off topic a little bit but...

what psi does the standerd actuator go up to on a R5GT turbo (water cooled type)

thanks
josh

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

I had 12psi on my old R5, believe it was a std actuator.
Cheers
Shane

was with a bleed valve?


thanks
josh

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

Nope, just alot of preload on the actuator.
Shane