Page:
Home > General Chat > uprated actuator

minivan

14 Posts
Member #: 6698
Member

Rotherham

23rd Jul, 2009 at 10:00:50pm

Hi
Can anyone tell me by adding the uprated actuator does this replace the ajustable bleed the valve. The reason for asking is that, is when I try to turn up the boost I can't see any change on the boost gauge. When the car is reved high the b/gauge goes round to about 25psi, this is when car is stood on drive. Is that normal.

heres abit of spec

1380
stage3 head
fast road cam
actuator 10psi

Also on low revs/pick up there seems to be a slight miss fire or flat spot . On tickover when cold the engine is chuging and missfires while driving. But when warmed up seem fine. I would like to make the car a nicer to drive at slow speed buy getting the flat spot sorted.
So any help on what to do next would be appreciated.

www.

Brett

User Avatar

9502 Posts
Member #: 1023
Post Whore

Doncaster, South Yorkshire

23rd Jul, 2009 at 10:36:07pm

sounds like it needs time on the rollers to be set up properly and you should not be seeing any boost sat on the drive

a 3rd /4 th gear pull is best to see what the boost is at if u can keep your eyes on the needle

Yes i moved to the darkside *happy*

Instagram @jdm_brett


minivan

14 Posts
Member #: 6698
Member

Rotherham

23rd Jul, 2009 at 11:08:30pm

do you know anyone for the rollers

www.
Home > General Chat > uprated actuator
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: