i'm getting quite good at this now!!
Turbo Mini Forums

after much much much twatting about with the whole ignition and carb set up on the mini, i can quite happily say that IT FINALLY RUNS !

it might not sound much, but after 2 manifold redesigns, 2 ecu systems, a new laptop, complete new ignition stuff, a burnt out exhaust valve, lots of gaskets, electricution and lots of drilling, welding and patience, to see it run and move under its own power is quite a buzz!

all i need to do now is figure out why it wont start without fuel being squirted down the carb and and choke under hard revving. think its a small set up issue though.

aiming for mitp too!!!!!!!!


anyone know how to put video's onto here from mobile phones???

Edited by turbochargedstu on 27th Jul, 2009.

balls to the blower!!!



1330,stage3 head, gt1549, canems ecu, S/C box and drops

Cant do it onto here, need to put it onto youtube or photobucket

Congrats!

have you fitted a fuel pressure gauge

www.

yes. on the regulator. they are twin bike carbs though.

balls to the blower!!!



1330,stage3 head, gt1549, canems ecu, S/C box and drops

so you don't think the pressure is to high. Had this on my turbo where it was to high

www.

it's at 5 psi going in to the carbs.

balls to the blower!!!



1330,stage3 head, gt1549, canems ecu, S/C box and drops