Breaking the miglia
Turbo Mini Forums

So here is a list of the bits for sale.

I'm offshore till wednesday but i thought getting this up a little in advance would give me chance to see what people are interested in.

Paul H has first dibs on the shell, and Turbophil from turbominis, the tank.

Please dont say you want a load of bits, only to want a few of them.

Prefer collection on anything but obviously i can post at cost. I use FEDEX so its not too expensive although larger items are a pain in the ass!

Most are brief descriptions, i can give details on anything if asked.

If you start adding up costs of new parts, i reckon these are about half the price and all in excellent condition other than a lick of paint.

Engine has done very little as was seen at the likes of MITP the other weekend.

Shell + front/bonnet/boot + R-ARB + brake lines + boot floor 4000
front subframe with adjustable tie bars/arms/hi-los etc 150
doors and carbon cards 150
rear subframe (modded with rear tube instead of C section, all brakes and radius arms + hi-los) 150
cooling setup (swirl pot, new radiator, silicon hoses) 100
fuel pump and pipes etc (full braided hoses, fittings/filter and pump, all new) 250
FPR 20
dash and gauges (acewell dash, boost gauge, temp and oil press) 100
corbeau revolution carbon fibre (1200 new!) seat 200
intercooler setup (cossie 4x4 with all braided hoses and alloy joining pipes) 75
HS - drive shafts + cv's etc 100
KAD 4 pot disc brakes with *i think* carbon metallic pads, vented discs etc 200
hubs + rack (rose jointed rack and modded front hubs) 100
alloy fuel tank with feed/return and vent) 75
MB's 7 x 10 wheels with nearly new 032's 400
Painless fuse box http://www.summitracing.com/parts/PRF-30001/ as new 60
sparco steering wheel and quick release boss 75
6 point harness 50
internal gear linkage 75
trax spax shocks + rears 100
carbon parcel shelf 50
plastic windows 50
fire extinguisher fully plumbed in lifeline 100
metty turbo fuel pump 25
custom exhaust 150
KAD handbrake quarters 15
rear complete lights 25
wiper motor 10

Engine

block/crank/pistons (forged omegas, piper vernier, phase 2 cam) 500
head full turbo challenge 350
1.5 roller rockers 75
modded rocker cover with extra breathers 35
JKD dog box built up gearbox 600
SC drops 100
carb + manifold + nics plenum 150
mirage + turbo (virtually new core) 350
full crank trigger setup 100
FD (3.9 semi helical) 50
ECU + sensors 600
clutch/flywheel - paddle/ultralight etc 150
forge T2 actuator 50
Forge Grp A DV 50
Brise starter 75
4 pin diff 50

Painless fuse box http://www.summitracing.com/parts/PRF-30001/ as new 60

SC drops 100
(are these roller drops?)

internal gear linkage 75
(is this KAD?)

modded rocker cover with extra breathers 35

cheers

Joe

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

I'll have the gearbox, I need to work out when I can collect it, I'll check my diary when I'm back in the office on Tuesday.

Edited by Rob H on 30th Aug, 2009.

not rollers no but done what, 50miles top at a guess.

not a kad one, its a custom one made using the original gearchange. neat, with supports and l/h-r/h threaded adjuster.

rocker cover has a 1" hose off the waterpump end, and then a slightly smaller over the clutch housing. will include the clutch housing to rocker pipe/adpator

i can see this lot going quick!

hey up iain, interested in:

4 pin diff 50 (minispares???)
+
s/c drops 100 (beat to it lol)
+
fuel pump 25

cheers

Edited by Brett on 30th Aug, 2009.

Yes i moved to the darkside

Instagram @jdm_brett

go on then, will you get a price for me posted?

also, have you got pics?, of the cooling set up too? might save me a head ache down the line

cheers

joe

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Ian, do you have any pics of the rad set up you are using, very interested.
Shane

Brett, not sure on the diff as it was in the box, but it was used for miglia racing and by me so its stood up well!

photos will all have to come on thursday when i'm home but it is a neat setup.

can get a price posted, but like i say, dibs now followed by posted prices end of the week

Fuel pump is also fairly new (its not the one you sold me phil! lol!)

its a brand new (well used for MITP only) mg metro turbo rad, alloy swirl pot and cap, all with custom silicon hoses and aluminium joins where needed.
just needs 2 little tabs welding on the front of you subby to put the rad stubs through and thats it. the pipework supports the rest. its a metro outlet for the head but that comes with it.

Shell + front/bonnet/boot + R-ARB + brake lines + boot floor 4000
front subframe with adjustable tie bars/arms/hi-los etc 150
doors and carbon cards 150
rear subframe (modded with rear tube instead of C section, all brakes and radius arms + hi-los) 150
cooling setup (swirl pot, new radiator, silicon hoses) 100
fuel pump and pipes etc (full braided hoses, fittings/filter and pump, all new) 250
FPR 20
dash and gauges (acewell dash, boost gauge, temp and oil press) 100
corbeau revolution carbon fibre (1200 new!) seat 200
intercooler setup (cossie 4x4 with all braided hoses and alloy joining pipes) 75
HS - drive shafts + cv's etc 100
KAD 4 pot disc brakes with *i think* carbon metallic pads, vented discs etc 200
hubs + rack (rose jointed rack and modded front hubs) 100
alloy fuel tank with feed/return and vent) 75
MB's 7 x 10 wheels with nearly new 032's 400 --- rosco454
Painless fuse box http://www.summitracing.com/parts/PRF-30001/ as new 60 -- Joey
sparco steering wheel and quick release boss 75 --- racer pete
6 point harness 50
internal gear linkage 75 -- Joey
trax spax shocks + rears 100
carbon parcel shelf 50
plastic windows 50
fire extinguisher fully plumbed in lifeline 100
metty turbo fuel pump 25 -- Brett
custom exhaust 150
KAD handbrake quarters 15
rear complete lights 25
wiper motor 10

Engine

block/crank/pistons (forged omegas, piper vernier, phase 2 cam) 500
head full turbo challenge 350
1.5 roller rockers 75
modded rocker cover with extra breathers 35 -- Joey
JKD dog box built up gearbox 600 -- Rob H
SC drops 100 -- Joey
carb + manifold + nics plenum 150
mirage + turbo (virtually new core) 350
full crank trigger setup 100
FD (3.9 semi helical) 50
ECU + sensors 600
clutch/flywheel - paddle/ultralight etc 150
forge T2 actuator 50
Forge Grp A DV 50
Brise starter 75
4 pin diff 50 - Brett

Edited by iain on 30th Aug, 2009.

no worries at all. I'm at home for nearly 2 weeks from the 13th to the 24th is of Sept.

I have to start stripping the car but most of it will be done in a day

ill take the sparco steering wheel and quick release boss, price posted?

cheers.

iain, can i ask what cones this thing ran? swiftune ones by any chance?

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

not sure as never had them out, rubber ones

Racer_pete - i'll sort out a price for post end of the week. guessing about a tenner.

pm sent about the wheels and tyres.

Cheers Ross.

Iain, pm'd ref front brakes/roller rockers

JK

If Carling made Mini engines
it would probably be like this one!

pm sent about :
mirage + turbo (virtually new core) 350
forge T2 actuator 50

Thanks

Poss interested in the dash, any pics of it?

PM'd about the Carb, Nics Plenum and Manifold :)

pm'd about head block crank pistons etc
thanks lee

Speeding is like masturbating, everyone does it, but not all of us film it and put it on the internet

[quote=fab,8th Oct, 2010]fuck off

il take the KAD's can collect.
also the dash if tom dont want it

ED

Edited by rubicon on 31st Aug, 2009.

dp

Edited by rubicon on 31st Aug, 2009.

TP

Edited by rubicon on 31st Aug, 2009.