Page:
Home > General Chat > Oil cooler / transfer hose threads in block & filter head?

turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

IIRC the block one is 5/8 UNF or UNC and the one in the filter head is 3/8 NPT?

Can anyone confirm this?

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

yes, deffo 5/8 UNF into the block, same as the metty sevo conection in the inlet manifold.

not sure on the other one but sounds right.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



theoneeyedlizard

User Avatar

7265 Posts
Member #: 1268
The Boom Boom speaker Police!

Essex

There is definitely two types as well.

In the 13's at last!.. Just


graemec

940 Posts
Member #: 1424
Post Whore

Carnforth, Lancs

There are two types of each:

Early:
Block = 5/8" UNF; Filter 1/4" NPT (Parallel I think)

Late:
Block = 11/16" UNF; Filter = 11/16" UNF

Edited by graemec on 9th Sep, 2009.


turbodave16v
Forum Mod

10980 Posts
Member #: 17
***16***

SouthPark, Colorado

What does early/late mean? Is this the SPi block? I recall this had a different tube assembly than previous A+?

On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better


Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY



apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire


That's the SPi block

On 9th Sep, 2009 graemec said:

Late:
Block = 11/16" UNF; Filter = 11/16" UNF

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

Home > General Chat > Oil cooler / transfer hose threads in block & filter head?
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: