Garage clearout
Turbo Mini Forums

Hi all, I have some stuff thats too good to chuck all located in Chester I cant see postage being worth it on the big stuff

RC40 - Seen very little use before I swapped to a maniflow. a bit of pitting on the Chrome tail. I will throw in a free flow manifold, so ideal for a small bore. However the manifold is free, it has a ding in it, but no hole and the mating surface could do with dressing to ensure a perfect fit. £25

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

NA Hif 44

HIF44 - Rebuilt with new: throttle disc, choke seals, throttle spindle, throttle seals, New old stock piston, NOS damper, NOS dashpot. New float, new jet, new jet bearing.

It has the following custom bits:
Right and left hand fuel intake one it tapped with a bolt in it, solid jet holder but I have a new bi-metallic one if you want to change it back.
It has a range rover intake I used it out attach a flexi-pipe to re-locate the air filter to the front of the car. I will take this off.

Its missing the throttle cable arm and you will need to get your own needle for your engine spec.

So not your standard ebay rubbish all for £50

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

I have a set of car ramps for sale Halfords great condition. £20 collection from Chester.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Jim could use these for his evil knievel ramp to get mini in back of his van.

On 14th Oct, 2009 gr4h4m said:
I have a set of car ramps for sale Halfords great condition. £20 collection from Chester.

If something is worth doing, it's worth doing half of.