Megajolt 'Fitting Kit' (no MJ now)
Turbo Mini Forums

V3 megajolt and a load of other bits with it. I think there is everything there you need to fit but it is as I bought it about 12 months ago - my plans changed and I've never fit it.

There is a trigger wheel, crank sensor, crank sensor bracket, EDIS unit and loom, Megajolt box and loom, Coil pack and a few ofther bits of wire. Even a modified lower rad bracket to clear the trigger wheel.
Oh and loads of instructions, a CD (presumably the Megajolt interface software) and an RS232 cable for your laptop.

It is a TPS version but I'm sure you can buy the module to make it a MAP version of you need/want to.

Looking for £170 Posted.

Edited by graemec on 23rd Nov, 2009.

WOuld you split by any chance?

I have all the edis stuff and trigger wheel, just after the tps MJ3?

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

I'd rather not, don't want to get landed with half a kit!

Feel free to buy it all and sell on what you don't want though

I might be interested in the rest at the right price! I have MJ already

Edited by mini_kel on 17th Nov, 2009.

Id happily give £70 for the MJ3, you gonna trump up the other £100 for the rest Kel?

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Erm NO!!

What the best price on this split up?

Edited by mini_kel on 18th Nov, 2009.

Maybe a be a little overpriced?

IMHO a built V3 jolt is worth £70-£80 in GWO

As for the rest of the stuff £50-£60 or so again IMHO?

If something is worth doing, it's worth doing half of.

£50-60 for the parts?!
OK the below are rough guesses for S/H bits but can't be that far off, if not on the cheap side. Total £95:

So with your £80 estimate for the V3 and my pricing is about right, if not generous.

Trigger wheel & Bolt £20
Edis £20
Crank sensor £7.50
Sensor Bkt £10
Wiring looms £7.50
Rad bracket £5
Coil Pack £10
Postage £15

Hassle free getting it all in one package...priceles!!

Edited by graemec on 19th Nov, 2009.

Best price split up:

MJ V3 £85 posted
Bits £95 posted

(Will only split if both parts are definately sold.)

coil pack, edis and CPS are £20 from the scrappers...

If you are not interested in buying this item, STFU and leave the seller to go about selling it.

Edit - Fair point Tom, i'll remove what I said.

Edited by Carl S on 19th Nov, 2009.

Thanks Tom.

(At least it is keeping it near the top!)



APB -
Possibly, but that depends if you are near a scrapper, if they have them in and if you can be bothered.

So £20+ hassle or £40 on your doormat?
(Plus your way you still have to find everything else.)

And as said, the prices were a rough guess.

Id probably go to £85 tbh, and agree with the trigger wheel etc, your not asking an ott price for the rest

fingers crossed someone will have a punt

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

If you decide to split the parts I will have the sensor, sensor bracket and loom at the prices quoted.

PMs sent

Just read this again - tadge44 are you after all the bits Joey doesn't want at £95 posted?
Or are you looking to buy just the sensor, bracket & loom on their own?

PM,d reply

OK - MJ sold to Joe.

All the bits still available and are to be sold in one 'package' for £90 delivered.

i'll have all the bits, pm your paypal to me i'll send tonight

hurrah!

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

WooHoo - I can buy some new gearbox bits now!!!

Payment sent....

Thanks Graeme

Been away from base, just got back home and it was waiting for me

Joe

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

So all sold?