Plasma Ignition with Dyno Results
Turbo Mini Forums

Anyone had a look at this product ?
http://www.okadaprojects.com/usa/

I was invited to a dyno test of this product today at a local Rolling road and to say the least I have been Impressed,

Test subject:
Honda S2000
attached is a graph of the two average power runs the top run is with the stock Ignition system and the bottom run is with the above Okada Plasma Ignition fitted.


What I find very interesting is the huge jump in torque when the Vtec cross over accurse with the Plasma Ignition

Sorry for the poor quality of the graphs but I made them up from a Photo taken off the Dyno computer screen as the bloody dyno machine computer packed up before we got a chance to print the graphs ( I think the cold had gotin to it burrrrr)

That link dont work, sounds very interesting though

I seriously doubt it!

http://www.okadaprojects.com/usa/home.htm

1399cc, Eaton M45 supercharger, N2O system, compression ratio 9.23:1, boost pressure 0,8bar/11.6psi.

http://www.garaget.org/?car=176816

was that a quad pack, replacement COP's or there driver unit?

interesting to note they do a drop in replacement for the VW coils i run :) the driver unit appears do do the same thing as the likes of the msd 6-AL

turbo 16v k-series 11.9@118.9 :)

Denis O'Brien.

Ya it was the quad pack Denis the do a unit the replace the standard ford coil pack and will work with mega jolt or squirt :)

interesting, Are you in a position to divulge the price, inc shipping duty etc?

turbo 16v k-series 11.9@118.9 :)

Denis O'Brien.