Turbo setup split, garanteed sale, have new engine
Turbo Mini Forums

Splitting my engine for definate now, new engine is going in tomorrow so this is now def for sale, sorry for any time wasted with previous thread.

Maniflow downpipe, clamp, link pipe and 2" back box, all brand new never fitted

£150 the lot ono ??





Brand new oil cooler and braided hoses

£50ono





Metro turbo fuel pump and fuel pressure regulator

£55ono




T3 fitted to manifold, standard no play in shafts but requires new actuator arm

£100ono





Straight cut gearbox, 4 pin diff, 3.1 FD, centre pick up, splash gaurd, straight cut drops

all only driven few hundred miles if that

£675ono




Turbo block, 10thou ground crank, rods, tubby dished pistons, reshimmed rings, honed, avonbar ph2 cam, lightened vernier timing, new tubby oil pump, CMS

all built with new cam, crank, rod bearings

£375ono

will gte pics of engine when i strip it down, open to offer on all bits and open to swaps on items

Gaz

Edited by the_soon_to_be on 24th Feb, 2010.

I'll take the boost gauge, I'll PM you.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

hello

price incl shipping for T3 fitted to manifold, standard no play in shafts but requires new actuator arm

and there no cracks into the house??

niels

Interested in braided oil feed pipe and bleed valve.

Also in the intercooler without pipes and hoses

Can you ship to holland?

Regards maikel

Edited by dimphy+maikel on 21st Feb, 2010.

Can you give me the size and dimensions of the intercooler please.

Manchester Minis

Who is the boost gauge made by?

In the 13's at last!.. Just

i imagine shipping on the turbo will be quite expensive, will weight it tomorrow night and find a price.. i cannot see any cracks in it

sorry dont want to split the intercooler from hoses.

will measure the intercooler tomorrow evening, as you can see its a nice fit instead of a grill

boost gauge sold,

Do you know who this is made by? I've got two like this, but need another.

In the 13's at last!.. Just

will you take £15 posted for the Bleed valve and 3m of silicon tube?

i can pay now?

cheers

Interested in pipes and hoses if you split from the IC
Also dump valve and inlet if you split that lot?
And the oil feed and bleed valve if the above do not take them.
Cheers

sorry prefer not to split, bleed valve is now sold.

rest still remains, open to offer on posted prices,

gaz

Do you know the thread size of the banjo bolt to the turbo? as i will be for a GT17 not a T3
Tar

afraid i dont, will look at the package tomorrow but not sure it will say it, a search on here not provide anything ?

intrested in the head :)

might take it off your hands

cheers

interested in the downpipe if your willing to split

hi mate

interested in the head if not gone already and do you know if its been skimmed?

I'd be interested in the plenum and heatshield if you would split it from the rest.

If something is worth doing, it's worth doing half of.

hello, i am interested in thre turbo if it has not gone yet? did you find out how much the postage was. cheers

Pm'ed you about the gearbox...very interested.


Deniz

69' Mini K Van
1986 Omni GLHS Shelby

oil feed gone yet mat? pm'ed you on tmf

Just a polite nudge about the fuel pump - this doesn't look like a bosch / lucas roller-vane type. Not saying it's not going to work, but it might be worth verifying part numbers and what-not to be sure it's suitable.

Good luck with the other sales - prices all seem very reasonable.

sorry oil feed has gone, anything sold is now packaged up and will be sent tomorrow morning..

as for the fuel pump, i bought it as a turbo fuel pump, having no reason not to believe the bloke, if you are telling me otherwise i will research it and amend prices where required

open to offers on all stuff, new engine has arrived to needs to be gone

gaz

To be clear - I know this is sold. I would just like to know where it is from so that I can buy a similar gauge.

In the 13's at last!.. Just

sorry completely missed your pm, i couldnt see who made the gauge as there is no markings on it, but it came from thelondonminishop from memory