Morspeed turbo booster heads, any good?
Turbo Mini Forums

thinking of buying one of these heads to go with the 1293 short engine ive just picked up, anyone know if there any good, heard good things about the company so should be ok, any thoughts?

ryan

pretty sure AlexF is running one. i'm running the st2 morspeed head and i'm pleased with it, although ive never had anything else to compare it to. he's a sound chap though and his prices are very good as is his work.

very good, I like mine :)

Alex

AlexF

Just to let you know..our:
Stage 2 turbo head / (Safe) 29cc chambers / std ports / 35mm inlet X 29.2mm sodium filled exhaust / ?424 inc vat

Stage 4 turbo head / Same chambers / fully ported and polished / same valves / ?599 inc vat.

We ALWAYS use sodium filled exhaust valves in our turbo heads. I havent had a close look at a morspeed head so i don't know if they use these valves or not. It's Important though.

Hope this helps

http://www.avonbar.com

well if were all allowed to advertise are business`s and nick threads ......
i`m the main supplier/shipment agent etc for "HUL" (heads u lose ) these heads are a copy of avon/morspee/vtax high boost heads and have been proven in a couple of high spec turbo`s.

Everyone knows that instructions only have to be read if the thing doesn't work....

avonbar, I have moved away from soidium filled exhaust valves as I have seen to many failures over the years, why do you see the need to use them?

Team Racing

I'll also be ditching the Sodium valves in my next head - and just use a wider seat to get the heat out of them.
I've seen pictures of them failing, but as I've never failed one myself, I can't make too much of a comment about the reasons for the failure!!!

D

as above non of HUL heads use sodium valves ....

Everyone knows that instructions only have to be read if the thing doesn't work....

ive ditched the sodium filled valves

So how much are your heads Minimark??

glad to here that as i aint using them neither in my homemade turbo head.

all done now just got to get it skimmed

always looking for them bigger bunches of bannanas

2nd hand sodium valves are not good news... IMO.

In all fairness its also a bit rude to stick your prices on a thread specifically askign about another suppliers heads... a PM would have had the same effect.

Alex

AlexF

exactly alex

Everyone knows that instructions only have to be read if the thing doesn't work....

wow free ads !!!!
i use solid 214n valves 8mm chrome stem 29 ,30,31,32 33 mm ,
or standard stem plasma nitrided 214 n 29, 31, 32 mm, exhausts
inlets 33, and 36 mm material as obove
chambers to 38.5 cc ,all heads with bronze guides , double springs - but most important is each head is ground to exact customer spec/ requirement , not off the shelf, no middle man i grind them, surface them , fit the guides, cut the seats write the theme tune ,sing the theme tune

Cool, i'll be seeing you on Saturday then!!

I could be so good for.......... grindin valves.. a du du du duu

lol