Page:
Home > Technical Chat > Fuel pump blanking plate dimensions

adcyork

User Avatar

539 Posts
Member #: 6807
Post Whore

York

21st Mar, 2010 at 05:06:06pm

Hi, i don't suppose anyone could measure a fuel pump blanking plate for me could they? I don't have one to take measurements from so any help would be great.
Thanks
Andrew

Edited by adcyork on 21st Mar, 2010.


the_soon_to_be

172 Posts
Member #: 1600
Advanced Member

Portsmouth, Hampshire

21st Mar, 2010 at 07:30:41pm

there about £4 to buy with new gasket, easier option ??

alpa

520 Posts
Member #: 2093
Post Whore

Grenoble, France

23rd Mar, 2010 at 06:42:46am

What do you need exactly ?
There are I'd say 44.5mm between holes, 2 M8 bolts.
You can remove and place back the pump, there is no paper gasket.

std 998 A+, g295, MD266, RHF4, 109hp @0.8bar/5400rpm

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

23rd Mar, 2010 at 08:09:30am

I very much doubt they are M8 bolts on the back of a standard a series block

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

Rod S

User Avatar

5988 Posts
Member #: 2024
Formally Retired

Rural Suffolk

23rd Mar, 2010 at 08:54:06am

44mm between holes (so probably actually 1 3/4") 5/16" holes and you could work the other dimensions out by scaling of this photo http://www.minispares.com/Product.aspx?ty=pb&pid=33080

Schrödinger's cat - so which one am I ???

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

23rd Mar, 2010 at 08:55:56am

alternativly you could get a gasket and draw round it

Edited by apbellamy on 23rd Mar, 2010.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

23rd Mar, 2010 at 08:58:32am

5/16 UNF

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


adcyork

User Avatar

539 Posts
Member #: 6807
Post Whore

York

24th Mar, 2010 at 06:36:53pm

Cheers for the help guys. Good idea on scaling minispares photo rod
Home > Technical Chat > Fuel pump blanking plate dimensions
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: