A+ Crank, must be good condition
Turbo Mini Forums

Hi all,

After my flywheel deciding to ruin the nose of my crank, I'm left with no other option but to fit another crank. So I'm after an A+ crank, must be good condition with no scoring or damage. I'd like to find something thats had a 10thou/no regrind in the past either too, just to make sure theres plenty of life left in it.

Cash waiting, many thanks;

Tom.

Tom

not sure if they are still doing them but I bought a brand new one from minsport with shells for a little over £120 if i remember last year

rob

They are about £250 now :(

If something is worth doing, it's worth doing half of.

Hi, i will be removing my crank soon. its not quite to what you want but its at the end of its life on the mains but the big ends have 1 grind left... the crank has been polished in the past and its done 6k miles with 140bhp output... it will come with vandervell big end bearing (6k miles) and AE mains 6k miles.... not sure how much to charge for it? or if you even want it but its coming out the engine as soon as poss the reason the engine is being stripped is because the bores were too big for the pistons and it blew the rings and the reason i am selling this crank is because i have no more use for it as i have got a standard (none ground) crank to use instead lol (bit contradictive)

I'd already had a fish on Minispares/Sport, there £120 with £100 surcharge on minisport :( Worst comes to worst thou an that will be the route I take. Cheers thou Rob.

Johnny, I'll have to say thanks but no thanks, I'm after something with a fair bit more life left in it. Thanks thou.

Any more offers?

I have an a+ ( think it's a early turbo type will check markings) is in good condition to my knowledge is standard mains and big ends with a perfect taper, looking for 100 squids

"Can I legally marry people now that I am ordained in the Church of the SubGenius?" aka i know jack sh"t

i also make things

i love coming home to chrome

VERY interested, I'll PM you in the morning.