| Page: |
| Home > Help Needed / General Tech Chat > O/T - Any carpenters? | |||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
8th Jun, 2010 at 07:30:40pm
I need some skirting board making up, wondered if anybody on here was good with wood or could recommend somebody local to me. You lads seem to know everything...
On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
 6729 Posts Member #: 618 Post Whore Glasgow |
8th Jun, 2010 at 07:43:02pm
fastcarl |
||||||
 4890 Posts Member #: 1775 Post Whore Chester |
8th Jun, 2010 at 07:49:38pm
who burnt the chips.. I run a supercharger and I don't care the TB is on the wrong side.
|
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
8th Jun, 2010 at 08:05:42pm
We where far too busy playing with carb's to worry about the chips!
On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 8604 Posts Member #: 573 Formerly Axel Podland |
8th Jun, 2010 at 08:54:29pm
When I needed some special architrave for our old house, I took a piece to our local timber merchants.
Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
|
||||||
|
Site Admin  15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
8th Jun, 2010 at 08:58:06pm
Go to the timber merchants just down from the Green Dragon. They may be able to help.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
 (2)[/url] by [url=https://www.flickr.com/photos/150672766@N03/]Rod Sugden[/url], on Fli) 5988 Posts Member #: 2024 Formally Retired Rural Suffolk |
8th Jun, 2010 at 09:23:41pm
We have a "proper" timber merchant only 40km from me - they have a "spindle" - which in wood terms is a large milling machine - that can do anything, just give them the profile and they make it.....
Schrödinger's cat - so which one am I ??? |
||||||
 6549 Posts Member #: 1149 #1 Basshunter Fan Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes! |
8th Jun, 2010 at 11:22:21pm
Its more like 12 foot tall, its the land of the big your house mate 1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.
|
||||||
|
Site Admin  8506 Posts Member #: 16 Sold the turbo and seeing what the C20XE can do! Near Lincoln |
9th Jun, 2010 at 12:10:27am
Lavers are really good and will have what you want. not too far from you at all at sheffield
|
||||||
|
Site Admin 8506 Posts Member #: 16 Sold the turbo and seeing what the C20XE can do! Near Lincoln |
9th Jun, 2010 at 12:10:56am
They do spindle moulding the lot. Just had a load from them. |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 07:28:50am
On 8th Jun, 2010 Tom Fenton said:
Go to the timber merchants just down from the Green Dragon. They may be able to help. He's never there and he doesn't answer the phone :( On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 07:33:29am
Rod - What's a KM? I thought we where still doing distance in imperial On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 6966 Posts Member #: 507 Fastest A Series Mini in the World leeds/wakefield. |
9th Jun, 2010 at 08:35:04am
Andy ,if you have to have cutting tool made for a apindle moulder your local timber merchannt/joinery shop will charge you min £100 , and theres uysually a min amount they will run off ,
|
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 08:53:38am
Thanks for the advice Carl. I wasn't expecting it to be cheap. I guess once they have the tool they'll be able to make more relativly easily. That skirting is all over the house and the last owner was a bit of a bodge artist! On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
6549 Posts Member #: 1149 #1 Basshunter Fan Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes! |
9th Jun, 2010 at 08:59:04am
Why not go smaller? 1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.
|
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 09:07:44am
Because it would look shit. 3 walls with 12" tall skirting and 1 wall 5" On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
6549 Posts Member #: 1149 #1 Basshunter Fan Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes! |
9th Jun, 2010 at 09:22:17am
I mean everyone ya dumplin! 1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.
|
||||||
|
5988 Posts Member #: 2024 Formally Retired Rural Suffolk |
9th Jun, 2010 at 09:23:13am
Carl is right about the cost if a new tool has to be made up for the spindle but if you find a long established company, they will most likely already have one.
Schrödinger's cat - so which one am I ??? |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 09:35:36am
On 9th Jun, 2010 MikeRace said:
I mean everyone ya dumplin! It would still look shit! The ceilings are 10 feet high, the skirting is the size it is to keep the scale right. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 09:40:18am
On 9th Jun, 2010 Rod S said:
Carl is right about the cost if a new tool has to be made up for the spindle but if you find a long established company, they will most likely already have one. I don't know if they are all the same, but the tool the place "near" me used was a vertical spindle and the "tool" only did the profile at the top, they just mounted it at the right height on the spindle and fed a rectangular plank through which was already planed on its front face. Rather than a minimum quantity, they just charged a set-up / tear-down fee and would then do as little or as much as I wanted. The current stuff looks to be made from 2 pieces - a plank with a rectangular piece with the profile cut into it fastened to the top. The problem with this house, or at least one of the problems, is that it was built as a bespoke house for some local pawn broker and nothing is exactly of the shelf... On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
5988 Posts Member #: 2024 Formally Retired Rural Suffolk |
9th Jun, 2010 at 09:45:04am
On 9th Jun, 2010 apbellamy said:
The current stuff looks to be made from 2 pieces - a plank with a rectangular piece with the profile cut into it fastened to the top. What a bodge...... 
OK I suppose if it's being painted, but we wanted stained/varnished so it had to be done in one piece. Schrödinger's cat - so which one am I ??? |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2010 at 09:50:32am
I guess they just didn't have the proper tools back in the 1880s On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 10023 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
9th Jun, 2010 at 10:11:18am
They were probably more capable back then than they are now. If something is worth doing, it's worth doing half of. |
||||||
|
Site Admin 8506 Posts Member #: 16 Sold the turbo and seeing what the C20XE can do! Near Lincoln |
9th Jun, 2010 at 02:20:34pm
Lavers have no end of tools, then make it to your sizes.
|
||||||
| Home > Help Needed / General Tech Chat > O/T - Any carpenters? | |||||||
|
|||||||
| Page: |