Page:
Home > Wanted > Original Floor Bungs

graemec

940 Posts
Member #: 1424
Post Whore

Carnforth, Lancs

13th Jun, 2010 at 11:55:52am

Help! I'm in urgent need (well need them this week) of about 7 of the bungs out of the Mini floor, the ones with a cross pressed into them and little tangs to hold them in place underneath.
I also need 1 of the ones out of the rear seat base - these are a little different and have a domed top.

I know I could plate over the holes or use grommets or similar, however as the rest of the shell requires little welding I want these to look 'right', as though it has no work. Unfortunately they are held in with sealer as well as the tangs and as such came out in the paint dipping process.

Anyone got a scrap shell they could remove some from?

Thanks!

modifiedminis

49 Posts
Member #: 768
Member

Fixing my car....

14th Jun, 2010 at 07:33:14am

Hi Graeme, I have got 2 shells I will be scrapping soon, I'll have a look tonight to see what I have got

Edited by modifiedminis on 14th Jun, 2010.


Brett

User Avatar

9502 Posts
Member #: 1023
Post Whore

Doncaster, South Yorkshire

14th Jun, 2010 at 08:14:53am




On 14th Jun, 2010 modifiedminis said:
Hi Graeme, I have got 2 shells I will be scrapping soon, I'll have a look tonight to see what I have got


dont mean to hyjack the thread im being abit cheeky here but i need a part cut out a shell as mine is fooked*happy*

the strip between the boot and rear window i can grab a pic if your shell is any good

any chance you could cut it out and send it on if yours are ok ?*happy*

Yes i moved to the darkside *happy*

Instagram @jdm_brett

Home > Wanted > Original Floor Bungs
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: