Parts for sale thread
Turbo Mini Forums

i have finally got round to taking pictures of the parts that i have sorted so far.


forge dump valve, ive even left the bit of pipe on £75



Front subframe, braced/ seam welded towers, braced tie rod bosses, and drilled/ light weighted, this is an SPI frame.

i dont really know how much this is worth £75 ono?





Jack shaft for use with K1100 head £55



New mini spare center oil pick up £20 SOLD PENDING PAYMENT



Honda cam gears for k1100 conversion £10




Forge intercooler, fits nicely in grill space with samco hose and 4 mikalor clamps to suit 63mm take offs (only used to mock up with bit does have a few slightly bent fins) £200






KAD top tower mounts and also a set of minispeeds own lower tower mounts (kad brand new minispeed have been mocked up with) £15 both pairs



Gear change shift bias new £20



Specialist components engine steady £25



KAD gearbox steady kit £95



SH engineering water pump take off plate with stainless cap head bolts £30 SOLD PENDING PAYMENT



Dizzy blanking plug, bracket and stainless bolt (i made it myself and everything obviously to my own design please dont take me to court) £10




Extended sump plug £5

Gearbox filter £15 SOLD PENDING PAYMENT

Long pulley bolt £5

and if you buy any of the above and you want them you can have the cooper s ball and spring or the core plugs




Samco hose

63mm 90 deg £17.50 each
63mm 45 deg £20
63mm to 51mm reducing 90 deg £20



Boost pipes

63mm x 76mm short connector £7
63mm 45 deg bend £15
63mm 45 deg with DV take off £20
63mm x 150 long £10



New a + 1275 cam bearings £7



K1100 LT cylinder head welded up for dry deck and takeoff welded on, comes with dry deck fittings, comes with cams etc and also SC end plate £350 (as far as im awear thats the going price for a standard head)

as shown i have only skimmed the rough welding off, as i was going to fully work the head but i can have it skimmed for an extra £25







Pair of new KAD rose jointed tie bars and on car adjustable bottom arms (these were from danwebsters car so you know there good quality) sold as a set as they are fitted with larger tie rod to bottom arm bolts rose joints are like new and have rubber boots and also new lower arm pins for the subframe

i will get a pic if anyone is interested £150 the lot

Edited by andywaller on 17th Jun, 2010.

Blimey Andy...like the Generation Game!
Not going for the twin cam idea then?

Ive turned gay

Going for honda power.



Also 2

3.1 crown wheel and pinions

£30 each?

GAY

I know!

cam bearings please asuming £7 is inc pp
I could do with the u pipe for dry deck and adaptor
and the long sump plug, caps and spring

edit: i mean core plugs not caps

Edited by philc on 16th Jun, 2010.

i will have the blanking plug and oil pick up pipe please. How much posted Thanks

My small bore turbo project http://www.turbominis.co.uk/forums/index.php?p=vt&tid=473901

Two questions, first: will the water pump take off fit small bore? And will you ship to the u.s.? If so, I'll have it please.

Shame the cage is in, could of tweaked it to mount a space frame for a Honda lump.

i will also have one of the 3:1 cwp.

pm sent

Will take 2nd dibs on water pump outlet, centre pickup pipe, but will take the gearbox filter and the core plugs please.

Edited by advantage998 on 16th Jun, 2010.

I'll take the second 3.1 CWP Andy, do you accept paypal?

Nick

Mr. Prawn, the friendly Crustacean- slowly making steps towards forced induction.

Hey, already dibbed on the water pump outlet advantage998.

Sorry, didnt notice your post, i'll be second in line then.

could i take the two 63mm 90's? how much together with postage?

cheers

i'll take the SC engine steady if still available please. also if you have any 3.1 CWP left i need one too!
can i also have second dibs on dizzy blacking if sale above falls through.
Thanks,
Ian

sorry im trying to sort through all the pms.

i guess being the first to post isn't quick enough. Nice one

Edit Wanted the blanking plug and oil pickup no one else had requested them before my post but got told today that the oil pipe is not available.
This is the reason i dont normaly buy from forums.

Edited by jlay on 17th Jun, 2010.

My small bore turbo project http://www.turbominis.co.uk/forums/index.php?p=vt&tid=473901

pm about the kad gearbox steadys...

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

PM regarding head plate etc.

PM re subby mountings

On 5th Sep, 2011 Vegard said:
I stand corrected. You should know

pm'd about a few items cash is ready mate

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

I've not had a reply either!

On 5th Sep, 2011 Vegard said:
I stand corrected. You should know

I've not had a reply either!

On 5th Sep, 2011 Vegard said:
I stand corrected. You should know