Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Track, Drag & Race > Smart Performance RR day and RWYB Weekend (2-3 October 2010)

robert

User Avatar

6743 Posts
Member #: 828
Post Whore

uranus




On 3rd Oct, 2010 cossierick said:
Wow some mega impessive figures, i was going to say it sounds like we have some very happy power fighure rollers, everyone seams to be 50hp up on last years at northampton, but after johns comment on the 7port it sounds fine.

So guys my questions to you lads with the 230+ power figures what have you been doing with the motors, is it end of season so just crank the boost up or have there been some clever mods done.

Has some one got all the figures to make a list of whos car run what with brief spec

rick


yup a bit more boost and a side pipe is all on mine.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM


John

User Avatar

10020 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

I would also say that even though the fan wasn't "that good" that it was probably marginally better that the one at Northampton last year.

If something is worth doing, it's worth doing half of.


theoneeyedlizard

User Avatar

7260 Posts
Member #: 1268
The Boom Boom speaker Police!

Essex

Ambient Temp was nice n cool too.

In the 13's at last!.. Just


sturgeo

857 Posts
Member #: 1778
Post Whore

Northants

On 4th Oct, 2010 theoneeyedlizard said:
Ambient Temp was nice n cool too.


Yup, datalogs from Dad's car back this up.
Last years RR day MATs peak at 44 degrees C, this years peak at 38.9.


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

Sounds like I've missed a top day out. Some really impressive powers. Especially pleased with our shit heap of a van. Completely outstripped our expectations.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*


John

User Avatar

10020 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

You sig should read 153nana's and 172curlys *wink*

If something is worth doing, it's worth doing half of.


gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

yep looks like a good event it would have been good to see my 998 SC12 setup against the most advanced small bore of Paul S's creation.
I would have been good to see the difference in performance, against spec?

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

I personally asked at least 4 people with some of the best SC setups that I knew of, both suck and blow, but sadly none could make it.

Maybe next time.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

when I read the original thread I didn't see much point in turning up with my small amount of power then didn't bother reading the thread again until the results were in.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


robert

User Avatar

6743 Posts
Member #: 828
Post Whore

uranus

link to start of the graphs thread..oh dear .bring a book..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=386089

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

gr4h4m, it doesn't matter if your not as powerful as some, if you have some thing interesting (which sounds like you do) you should have brought it along :) Any thing that's good what ever the power is welcome.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


sturgeo

857 Posts
Member #: 1778
Post Whore

Northants

Does Nic now have the most powerful turbo A series without gas??


Paul S

User Avatar

8604 Posts
Member #: 573
Formerly Axel

Podland

I have been informed that the average is very close to last years number.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

looks that way yes Sturgeo. I've not tried a full power run for ages with out gas on mine, But don't thing it would be that good any way.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

On 5th Oct, 2010 Miniwilliams said:
looks that way yes Sturgeo. I've not tried a full power run for ages with out gas on mine, But don't thing it would be that good any way.


Matt, your engine have everything that the others have except a modern turbo.

Maybe it's time for MiniWilliam Turbo 4.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


T3Tone

User Avatar

1666 Posts
Member #: 252
Post Whore

Sunny suffolk

Yes matt listen to the man, i think you have hit a brick wall with the old T3 barge

-MINI CLUBMAN 1380 TURBO-


Nic

User Avatar

9311 Posts
Member #: 59
First mini turbo to get in the 12's & site perv

Herefordshire

Yes matt!! Chuck it in the bin!!!!! Bring on the modern turbo


tadge44

3004 Posts
Member #: 2500
Post Whore

Buckinghamshire

I,d like to hit Matts" brick wall "at 300+hp with my T3 !!


gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

It would be good in the future to see the difference in power between my setup and a more efficient turbo setup


On 4th Oct, 2010 Miniwilliams said:
gr4h4m, it doesn't matter if your not as powerful as some, if you have some thing interesting (which sounds like you do) you should have brought it along :) Any thing that's good what ever the power is welcome.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

lol Tadge44, on and upwards i guess. Yes i know yourt right guys, But just getting around to changing it all seems so much work for what little engery i have now a days. and then there is what to get errr.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


John

User Avatar

10020 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

GT60? *hehe!*

http://www.turbobygarrett.com/turbobygarre...41_731377_1.htm

Edited by John on 6th Oct, 2010.

If something is worth doing, it's worth doing half of.


Carl S
Forum Mod

User Avatar

1927 Posts
Member #: 1761
Stalker

Bristol




On 6th Oct, 2010 John said:
GT60?


Why not go for 2 whilst your at it? Belt and braces.


Miniwilliams

User Avatar

5329 Posts
Member #: 140
Proven 200+bhp & Avon Park 05,06,07 Class D 3rd place

would that slow it down a bit at the top end?

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

It's probably my lack of understanding, but I'm a bit confused.

I watched the video of our van on the rollers last night. Once he's got it up to speed, he drops it into neutral and lets it cruise down. Is this so that the RR can calculate transmision losses? Obviously it can't be measuring engine power at that point as the engine isn't rotating the driven wheels.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

Yes Andy, you recoreded the rundown test, that, as you say, measures losses.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.

Home > Track, Drag & Race > Smart Performance RR day and RWYB Weekend (2-3 October 2010)
Users viewing this thread: none. (+ 1 Guests) <- Prev   Next ->
To post messages you must be logged in!
Username: Password:
Page: