oil cooler pipes and bends
Turbo Mini Forums

my oil cooler pipes come straight out of the block straight with no bend,

i would like to find some even just the ends that are at angle so that the pipes are not pushing on the back of my grill

any help on finding pipes or just the elbows or possibly just some information on the threads that are used on the oil filter housing and the oil take off on the block

5/8" block and 1/4" npt filter housing for pre 1992 engines, later engines use 11/16" UNF unions on block and filter housing.

i always thought pre 92 was 1/8 unf