Arch/Wing liners.
Turbo Mini Forums

What do you guys think of these? Good or bad idea. I've heard mixed reviews about these so I wanted a good opinion before I spend my well earned cash.

http://cgi.ebay.co.uk/MINI-WING-LINERS-UND...=item2c57fc78cd

Well they tend to dissapear when you hit foxes at reasonable speed on 106s lol. Tbh i tried some for about a week and wasnt so fond of them i got alot of noise from them so took them off and gave to a friend but they were very cheap ones.

Drives
-Ford S-max Mk2 Ecoboost
-Rover 100 VVC #2 - track project

Searching is all you need on TurboMinis

Yeah, good.

Tried to get Camlo liners but they're like rocking horse poo nowadays so these were the next best alternative and I think they're better as they are very well designed and they have proper flanges and bulges that do actually fit over the top shocker brackets.

Have them fitted on the van and they do stop all the shite flying up under the scuttles and headlamp bowls.

They also fit well around the vans Mk1/2 door hinge supports under the A panels, these are not fitted on interior hinge cars.

Had to watch the LH inner wing louvers on the van as I have an electric fan down there and an ali rad pumping out masses of heat from the turbo lump.

If you dont trim the shield, you can end up creating an airflow resistance which will lead to overheating.

I just took my time (10 and 1/2 years to be precise !) and made sure the shield was well out of the way, sculping it as necessary with a Stanley knife.

I also pop riveted the outer seam with stainless rivets and vaseline to stop corrosion. The kit supplied is devoid of these but does come with the big ali rivets that go under the inner wheelarch.

Bit steep at £80 though. Think I paid £59.

Richard.

Minivanless, but reluctantly happy living with the decision. There'll be another one day.
http://www.youtube.com/profile?user=minimadmotorman#p/u