Page:
Home > Help Needed / General Tech Chat > metro turbo four pots

clubman91

User Avatar

263 Posts
Member #: 8923
Senior Member

North Wales

5th Dec, 2010 at 04:25:57pm

hi all,
any advise where i can get rebuild kit for metro turbo brake calipers...pistons..seals..and nipples?

thanks mark

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

5th Dec, 2010 at 04:33:04pm

minispares

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

clubman91

User Avatar

263 Posts
Member #: 8923
Senior Member

North Wales

5th Dec, 2010 at 04:38:51pm

just seen them on there cheers mate

hazpalmer

User Avatar

1648 Posts
Member #: 9038
Post Whore

Carlisle, Cumbria

5th Dec, 2010 at 04:58:24pm

dont forget to use the coupon code CVATFREEDEC *wink*

Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

5th Dec, 2010 at 09:03:53pm

You might have trouble finding the seals between the calipers halves. Don't bin those.

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

clubman91

User Avatar

263 Posts
Member #: 8923
Senior Member

North Wales

12th Dec, 2010 at 03:56:29pm

hi again all,
well iv had new pistons and seals..3 of my bleed nipples have snaped iv tryed everything to get them out put a small drill all the way down easy out tryed heat on them that will not move any ideas what have other people done have you every drilled and re taped the hole if so wat size drill and tap have you used

thanks for any advise

Edited by clubman91 on 12th Dec, 2010.

Home > Help Needed / General Tech Chat > metro turbo four pots
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: