Baulk rings
Turbo Mini Forums

im rebuilding my gearbox replacing everything
i have everything i need accept the baulk rings i was after a set of performance baulk rings from mini spares but they are out of stock and don't know when they are likely to get some more are there any others that are just as good?

Edited by turbominij on 22nd Dec, 2010.

"Tuning should be a compromise between what is possible and what is necessary"

10)Thou shalt always quest for more power

If the originals were fine, I'd resuse them. They are better quality compared to most of the crud out there.

It will be necessary to check the clearance between the gear and cone though if that makes sense to make sure its not too worn.

Edit: the bulk ring not cone

Edited by minimole23 on 22nd Dec, 2010.

nope i have one useable out of 4 so i need some new ones the other three push down all the way to the gear face no matter which gear i put them on

so anyone know where to get some decent ones from ? (that have them in stock)

"Tuning should be a compromise between what is possible and what is necessary"

10)Thou shalt always quest for more power

not sure of availability currently but i had to strip a couple boxes to get some good ones

Yes i moved to the darkside

Instagram @jdm_brett

[quote=minimole23,22nd Dec, 2010]If the originals were fine, I'd resuse them. They are better quality compared to most of the crud out there.

agree! ...... if it went in gear ok and held in gear in the old box. alls well