breaking my 73 clubby project
Turbo Mini Forums

1973 mini clubman.

25k fsh, needs calipers and exhaust and wheel bearing for p/side rear, car runs when these are on. i have had it running and it starts 1st time every time.

i have changed the hubs from drum to disc and have disc's and flanges on the car with new ball joints ad cv joints.

would like to sell this as is for £900

IM BREAKING THE REST SO OPEN OFFERS

now for the parts

FRONT

powder coated subframe 4 bolt type £150
p/c top arms in red with new knuckles and rebuild kits x2 £75
1.5 lower arms poly bushes - new £45
h/d tie rods poly bushes - new £30
x2 lowered GAZ shocks new £140 x4
new curly pins £12
x2 rubber cones unused £125 x4
hi-lows p/c red - new £55 f/r
7.5 4 pot alloy caliper with disc's and flages new and unused £350
all new copper brake lines
goodridge hoses - new £15

REAR

powder coated subframe £150
recond radius arms p/c in red £150
p/c hubs new bearings £30
x2 lowered GAZ shocks -new
built up back plates new and unused inc p/c h/b brakets £90
mini fins new unused £80
adj camber brackets - new £30
KAD hand brake quads - new - with new pins £25
DSN billit alloy trunions in red - new £40 with bushes
p/c hi-lows in red - new
x2 rubber cones - new
poly bushes complete set - ne w
lowered GAZ shock new and unused
and a copper maniflow freeflow manifold, 1.75 system manflow, maniflow inlet and stage 1 carb with needle - all new £200

exhaust will come with fitting kit
MISC

orange clutch - new £30
turbo plate - new £20
duplex timming set - new £20
turbo oil pump - new £25
tim rev counter £30
cone compressor tool £25

ALL PRICES EXCLUDE POSTAGE

http://s215.photobucket.com/albums/cc233/1330gt/

Edited by budsmoker84 on 1st Jan, 2011.

This post has been deleted once already because it has no prices on the parts.
Put prices or it will be deleted again.
Its all in the rules

Paul

I seriously doubt it!

cool

im on it now

now with prices

i will take the goodridge hoses. If they are the braided ones in the photos..?

also have a set of 4 refurbed 10x6 wellers in silver with 3 tyers holding air but maybe not road legal

How much are you after for the "lowered GAZ shock new and unused"

In the 13's at last!.. Just

dibs......on the vernier timing set....

sorry ...the duplex timing set.....

sorry blond

sorry thats a mistake i only have the 4 no single shock for sale

How much for the manifold, exhaust, inlet and fitting kit without the carb?

what make are the minifins?

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!