Sorted out my wiring!
Turbo Mini Forums

Pics will follow, rewired the front of my car this week so ive been a bit quiet! also my laptop has broken from buying a dodgy gps reciever so im making the shop i bought the gps from sort it.

Added also a blade type fusebox, definately recommend them, and ive done as jimster said and gone round everywhere on the car checking tightness of bolts :)

I need a new bolt and nut, the one that goes through the top arm and the bottom of the front shock absorber, does anyone have a spare one because the nut and bolt suppliers dont have anything suitable :(

Also, does anyone know off the top of their head where the feed to the bottom fuse on the fusebox comes from?

thankyou

Previous Engine: 1040cc Morespeed engine, 1275 turbo head T2 Turbo Mirage Manifolds Megajolt
Previous engine: STD metro turbo, megajolt
Drives: 399bananahp (flywheel) Honda Civic Vtec b18c4 T28 Turbo 1968 Mini

Megajolt maps to download: http://www.jamesfawcett.co.uk/cms/index.ph...&gid=3&Itemid=3

feebs

the BEST NUT AND BOLT supplier near you is

B D BOLTS at batley if they dont have anything no one will have

i think its the nuts your after on the shocks.

if i remember rightley they are 3/8" UNF

and ask for zinc plated ones as they stand up to the Corrosion better

The feed for the fuse box comes through the ignition!

Minispares do the top-arm bolts...

Yes they are 3/8UNF. Make sure you get bolts and not set screws, the length of the plain section IS important.

I use a company called "Namrick" who mail order nuts and bolts, they used to do a mixed imperial UNF package for about ?12 that you will find EXTREMELY useful.

Hex Head Bolts, Nuts and Washers :

High Tensile ZInc Plated
(1/4", 5/16", 3/8") UNF
450pcs
Mixed Pack ?13.50

Ordering off the site now then - thanks tom! - again!!!

Previous Engine: 1040cc Morespeed engine, 1275 turbo head T2 Turbo Mirage Manifolds Megajolt
Previous engine: STD metro turbo, megajolt
Drives: 399bananahp (flywheel) Honda Civic Vtec b18c4 T28 Turbo 1968 Mini

Megajolt maps to download: http://www.jamesfawcett.co.uk/cms/index.ph...&gid=3&Itemid=3

Thanks dave, will keep that as a last resort i bet they charge loads, and ill get the details of that place in batley. Btw turboliam works in batley where hes building his turbo mini at the moment :)

Previous Engine: 1040cc Morespeed engine, 1275 turbo head T2 Turbo Mirage Manifolds Megajolt
Previous engine: STD metro turbo, megajolt
Drives: 399bananahp (flywheel) Honda Civic Vtec b18c4 T28 Turbo 1968 Mini

Megajolt maps to download: http://www.jamesfawcett.co.uk/cms/index.ph...&gid=3&Itemid=3

Feebs see post about 205 diesel............